Microstructure and properties of Al–70Si alloy prepared by laser cladding

Peng Hua,Ao Liu,Xianfen Li,Rui Li,Yue Cao,Wei Zhou

DOI: https://doi.org/10.1557/s43578-023-01202-7

IF: 2.7

2023-10-23

Journal of Materials Research

Abstract:In this study, Al–70Si alloy was prepared by laser cladding. The effect of microstructure on the mechanical and thermo-physical properties was elucidated by comparing specimens prepared by laser cladding and casting methods. It is found that the laser cladding process can effectively reduce the formation of coarse primary silicon, which inevitably occurs in large quantities in cast samples. Therefore, various properties have been significantly improved. The tensile strength reaches 85 MPa, the thermal conductivity at room temperature is 76.6 W/(m·K), and the coefficient of thermal expansion (CTE) is 8.19 × 10−6/K. In addition, the solid solution treatment is able to spheroidize the primary silicon and passivate the sharp corners. The change in Si phase morphology can greatly reduce stress concentration and increase the degree of interfacial bonding. This resulted in an increase in tensile strength and thermal conductivity of 50.7% and 42.2%, respectively.Graphical Abstract

materials science, multidisciplinary