Abstract:There has been considerable interest in low-temperature in-situ integration techniques for the fabrication of hetero-structured substrates and micro/nanosystems. This study presents a novel bonding approach that uses a water vapor-assisted surface activation strategy with neutral oxygen species (NOS). This method enables of highly efficient in-situ bonding process that utilizes the controllable and flexible environment to meet specific integration needs without exposure to the unstable ambient air. The NOS and water vapor increases hydroxyl groups, leading to smoother and more hydrophilic surfaces. The combined effects of NOS and the water vapor result in a larger bonded area ratio and significantly higher bonding energy compared to those activated by NOS alone. Meanwhile, the silicon oxide and quartz glass surfaces avoid being heavily electrically charged. This process thus achieved flawless silicon/quartz glass wafer bonding at 150 degrees C with a high bonding energy (similar to 4 J/m(2)) and Si/Si bonding pairs without any subsequent annealing voids. Then, the bonding pairs have been verified to have high reliability in extreme environments from -65 degrees C to 200 degrees C with no thermal-shocked cracks. The high-quality heterointerfaces could also withstand subsequent mechanical grinding and polishing for silicon-onquartz glass (SOQ) fabrication. Moreover, a SOQ structured microfluidic heat pipe device was successfully fabricated based on the low-temperature in-situ heterogenous bonding. The robust heterointerfaces ensured nonleakage working during the heat dissipation. This facile and cost-effective bonding method is suitable for damage-free heterogeneous integration of active devices, micro/nanofluidic chips, and M/NEMS packaging. It has of great potential in fields such as biochemical analysis, quantum computing, and thermal sensing.

A handy reversible bonding technology and its application on fabrication of an on-chip liquid metal micro-thermocouple

Irreversible bonding techniques for the fabrication of a leakage-free printed circuit board-based lab-on-chip in microfluidic platforms—a review

Reversible bonding for microfluidic devices with UV release tape

A Handy Flexible Micro-Thermocouple Using Low-Melting-Point Metal Alloys

Development of Low-Temperature Bonding Platform Using Ultra-Thin Area Selective Deposition for Heterogeneous Integration

Recent Progress in Metallurgical Bonding Mechanisms at the Liquid/Solid Interface of Dissimilar Metals Investigated Via in Situ X-ray Imaging Technologies

From Surface Activation to Microfluidic Heat Pipes: an Innovative In-Situ Wafer Level Heterogenous Bonding Method

Mechanism Of Low Temperature Cu-In Solid-Liquid Interdiffusion Bonding In 3d Package

Present Development of Thermosonic Flip - Chip Bonding Process

Study on Low-Temperature Bonding and Reliability of Nano-Twin Copper Micro-Cone Array

Au-Si Eutectic Bonding Technology for MEMS Device

Cu-Based Thermocompression Bonding and Cu/Dielectric Hybrid Bonding for Three-Dimensional Integrated Circuits (3D ICs) Application

A Novel Low- Temperature Cu/SiO2 Hybrid Bonding Based on Functional Group Selective Construction

Development of low temperature Cu Cu bonding and hybrid bonding for three-dimensional integrated circuits (3D IC)

A Cu-Sn/BCB Hybrid Bonding with Embedded Bump Structure

Copper Bonding Technology in Heterogeneous Integration

Reversibly-bonded microfluidic devices for stable cell culture and rapid, gentle cell extraction

A High Copper Concentration Copper-Quadrol Complex Electroless Solution for Chip Bonding Applications

Multi-Chip 3D Integration Using Mechanical Interlock Bonding (MIB) Technology and Optimized TSV

Study of low temperature eutectic bonding process for MEMS hermetic package

In Situ Study on Cu-to-Cu Thermal Compression Bonding