Static and dynamic contact performance of marine circuit breakers consider jolt vibration

Tao Sun,Yuanjiang Geng,Changsheng Chen,Qingrui Yu,Lian Yang,Tianxi Lu

DOI: https://doi.org/10.1007/s00202-023-02110-z

IF: 1.63

2023-11-20

Electrical Engineering

Abstract:To overcome the jolt vibration impact of marine circuit breakers, this paper studies the relationship between the influence parameters and the contact performance of the contact system. A parametric approach is utilized to explore the effects of load size, pulse width, and different waveform loads on the vibration response of the contact system. The results show that the vibration increases with the increase in acceleration at peak contact acceleration. The ultimate upsetting acceleration peak of the contact system is determined to be 9.2 g. Large acceleration impacts should be avoided. As far as pulse width is concerned, the vibration response of the system with narrow pulse width is more sensitive than that with broad pulse width. So, monitoring of narrow pulses should be increased. Additionally, under various forms of load, the range of safe contact areas is triangular load, half-sine load, and step load in that order. Thus, circuit breakers need to increase the detection of step loads to prevent faults. The findings provide a theoretical foundation and guidance for the design of low-vibration marine circuit breakers and the improvement of their contact performance.

engineering, electrical & electronic