Abstract:The development of high-performance integrated circuit chips and the shrinkage of feature sizes according to Moore’s law bring forward continuously the requirements for low dielectric constant (low-k) materials with various excellent properties in the back-end-of-the-line (BEOL) interconnect. Porous SiCOH films prepared by plasma enhanced chemical vapor deposition (PECVD) through a porogen approach are widely applied to industry and extensively studied. Thermal annealing is an important process for fabricating the porous low-k films, which has a great influence on film structure as well as properties. SiCOH films are deposited by PECVD using tetraethoxysilane and limonene as precursors, and annealed at 450 ℃ for 1.5 h under nitrogen atmosphere. The evolutions of film structure and properties during thermal annealing are revealed, and the reaction mechanism for structure change is also proposed. Fourier transform inferred spectroscopy and solid state nuclear magnetic resonance results show that the as-deposited film is an organic-inorganic hybrid film composed of various kinds of Si-O-Si, -CHx, Si-O-CH2CH3, etc. The organic component is removed almost completely during thermal annealing, making a porous film with a Si-O-Si inorganic skeleton. The skeleton is also rearranged at the same time. Deconvolution of the Si-O-Si absorption band of the FTIR spectrum reveals that the cage-like Si-O-Si occupies the major part for both as-deposited and annealed films, while the amount of silicon suboxide Si-O-Si decreases and that of network Si-O-Si increases during thermal annealing, making the film more robust. More C=C and Si-C are formed through chemical reactions between Si-H, -CHx and Si-O-CH2-CH3, and crosslinking is further enhanced. Nitrogen adsorption/desorption isothermal measurement reveals that a large number of micropores with diameter less than 2-3 nm are created during thermal annealing, which is consistent with the removal of organic groups and the existence of cage-like Si-O-Si. As a result, both the refractive index and dielectric constant decrease significantly from 1.476 (λ =630 nm) and 3.45 to 1.365 and 2.60, respectively. Because of the increase of C=C after annealing, extinction coefficient and leakage current density increase. Although there is a shrinkage of 14.7% in film thickness and a reduction of mechanical properties after annealing, the Young’s modulus is still larger than 4 GPa. Considering all kinds of properties, the obtained film appears to be a competitive candidate as inter layer dielectrics in the BEOL interconnect of integrated circuits.

Structural, chemical, and metal-oxide-semiconductor characteristics of RF magnetron sputtered thulium oxide passivation layer on 4H-silicon carbide substrate

Thermochemical process occurring in PLD-derived SiC films during vacuum annealing

Deposition of Dense SiO2 Thin Films for Electrical Insulation Applications by Microwave ECR Plasma Source Enhanced RF Reactive Magnetron Sputtering

Microstructure Optimization and Optical and Interfacial Properties Modulation of Sputtering-Derived Hfo2 Thin Films by Tio2 Incorporation

Investigation of microstructure evolution in Pt-doped TiO2 thin films deposited by rf magnetron sputtering

Effects of post-deposition annealing on BaTiO3/4H-SiC MOS capacitors using aerosol deposition method

Annealing Behavior of Ultrathin Mo Layer Located at Interface or on Surface of Ti－Si System

In Situ Characterization of Titanium Silicide Formation: the Effect of Mo Interlayer, Temperature Ramp-Rate, and Annealing Atmosphere

Effects of Varying Annealing Ambient towards Performance of Ternary GaxCeyOz Passivation Layers for Metal-Oxide-Semiconductor Capacitor

Single Crystalline Tm2O3 Films Grown on Si (001) by Atomic Oxygen Assisted Molecular Beam Epitaxy

XPS Analysis of Silicon Oxycarbide Formed on the Surface of Rf-Sputter Deposited SiC Thin Films

Effect of Thermal Annealing on the Structure and Properties of Plasma Enhanced Chemical Vapor Deposited Sicoh Film

Thermal Stability And Electrical Properties Of Titanium-Aluminum Oxide Ultrathin Films As High-K Gate Dielectric Materials

Impedance spectroscopy study on post-annealing-tuned polycrystalline CaCu3Ti4O12 films: Evidence of Barrier Layer Capacitor Effects

Effect of thermal annealing on the luminescent and structural properties of the SiO x C y thin films by organic catalytic chemical vapor deposition

Interdiffusion and Phase Formation During Thermal Annealing of Ti/Mo Bilayers on Si Substrates

Enhanced Formation of the C54 Phase of Tisi2 by an Interposed Layer of Molybdenum

Contactless analysis of surface passivation and charge transfer at TiO 2 –Si interface

Interface diffusion and reaction between Ti layer and Si3N4/Si substrate

Implantation of Carbon to Stabilize TiSi2 During Thermal Annealing

Annealing Influence on Stoichiometry and Band Alignment of 4H-SiC/SiO2 Interface Evaluated by X-ray Photoelectron Spectroscopy