Abstract:Glass is a hard and brittle insulating material that is widely used in optics, biomedicine, and microelectromechanical systems. The electrochemical discharge process, which involves an effective microfabrication technology for insulating hard and brittle materials, can be used to perform effective microstructural processing on glass. The gas film is the most important medium in this process, and its quality is an important factor in the formation of good surface microstructures. This study focuses on the gas film properties and their influence on the discharge energy distribution. In this study, a complete factorial design of experiments (DOE) was used, with three factors and three levels of voltage, duty cycle, and frequency as the influencing factors and gas film thickness as the response for the experimental study, to obtain the best combination of process parameters that would result in the best gas film quality. In addition, experiments and simulations of microhole processing on two types of glass, quartz glass and K9 optical glass, were conducted for the first time to characterize the discharge energy distribution of the gas film based on the radial overcut, depth-to-diameter ratio, and roundness error, and to analyze the gas film characteristics and their effects on the discharge energy distribution. The experimental results demonstrated the optimal combination of process parameters, at a voltage of 50 V, a frequency of 20 kHz and a duty cycle of 80%, that achieved a better gas film quality and a more uniform discharge energy distribution. A thin and stable gas film with a thickness of 189 μm was obtained with the optimal combination of parameters, which was 149 μm less than the extreme combination of parameters (60 V, 25 kHz, 60%). These studies resulted in an 81 μm reduction in radial overcut, a roundness error reduced by 14, and a 49% increase in the depth–shallow ratio for a microhole machined on quartz glass.

Experimental Investigation for Micro-Machining of Borosilicate Glass using Ultrasonic Assisted Rotary Electrochemical Discharge Machining (UA-RECDM) Process

An investigation of energy utilization behavior on borosilicate glass through heating and stirring of the electrolyte in electro-chemical discharge machining

Computational modelling and experimental investigation of micro-electrochemical discharge machining by controlling the electrolyte temperature

Investigation through novel tool-electrode feeding approach on electrochemical discharge machining of glass

Clarifying the phenomenon of Ultrasonic Assisted Electric discharge machining

Improvement in performance during micromachining of borosilicate glass with temperature-stirring-assisted ECDM

A Hybrid Process of Electrochemical Discharge Machining (ECDM) and High-Speed Milling (HSM) on Quartz Glass

Implementation of tool and electrolyte-based development in the ultrasonic-assisted ECDM process: a review

A green and precision compound machining method for glass micro components – Ultrasonic assisted electrochemical discharge grinding with multi-hole tube electrode

Numerical and experimental investigations to analyze the micro-hole drilling process in spark-assisted chemical engraving (SACE)

Modelling Studies of Rotary Magnetic Field in ECDM for Microchannel Fabrication of Silica Glass

Improvement of Surface Quality and Machining Depth of μ-ECDM Performances Using Mixed Electrolyte at Different Polarity

Experimental and numerical analysis of pulsed-electrochemical discharge process with electrolyte stirring

Synergistic roles of steady dwell tool feeding and ultrasonic vibrations in electrochemical discharge machining of alumina

A study on the effect of main process parameters of rotary ultrasonic machining for drilling BK7 glass

Study of Gas Film Characteristics in Electrochemical Discharge Machining and Their Effects on Discharge Energy Distribution

An Investigation into Laser-Assisted Electrochemical Discharge Machining of Transparent Insulating Hard-Brittle Material

Investigation of the Material Removal Mechanism in Electrochemical Discharge Drilling Using a High-Speed Rotating Helical Tool-Electrode

On the Machinability and Formation of Gas Film Thickness in ECDM of Silica based Pyrex Glass

Optimization of Rotary-Magnet assisted ECSM on borosilicate-glass using machine learning

Sonication of tool electrode for utilizing high discharge energy during ECDM