Experimental and numerical analysis of pulsed-electrochemical discharge process with electrolyte stirring

Dil Bahar Akshay Dvivedi Pradeep Kumar Department of Mechanical and Industrial Engineering,Indian Institute of Technology (IIT) Roorkee,Roorkee,India

DOI: https://doi.org/10.1080/10426914.2024.2406767

IF: 4.7832

2024-09-26

Materials and Manufacturing Processes

Abstract:To eradicate the losses in high-frequency wireless transmission systems, glass-vias is favored over silicon-vias for the packaging of radio frequency devices. However, during machining of glass vias, poor scavenging of sludge and electrolyte scarcity in the working region degrades the ECDM performance. To cope up with these problems, this study is an attempt to induce electrolyte stirring using a magnetic stirrer in the ECDM, called S-ECDM. An electrostatic study for electrochemical cells of ECDM was performed to analyze the discharge behavior of electrodes for tool selection. A Gaussian based thermal finite element modelling (FEM) has been carried out for ECDM and S-ECDM by considering pulsed-discharges with regards to voltage, electrolyte temperature, pulse on time and partition energy. The temperature profiles were utilized in the estimation of machining rate (MR) in the micro drilling of borosilicate glass. Subsequently, simulation as well as experimental results suggested around 50% higher MR in S-ECDM than ECDM. Furthermore, characterizations have been performed to substantiate the process mechanism of the proposed process in the ambit of flushing, etching and surface roughness of micro holes. Owing to its performance and process stability, S-ECDM can be considered as a commercially viable process.

materials science, multidisciplinary,engineering, manufacturing