Effect of the Stirring Velocity and the SiO 2 Precursor Particles Feeding Rate on the Microstructure of the Al 2 O 3 /SiO 2 /Al Composites Prepared via Stir Casting Process

Kang Wang,Zhiqin Lei,Zhongmiao Liao,Chenliang Tao,Yanglin Zhong,Zhiyu Wang,Lijuan Zhang,Wenfang Li

DOI: https://doi.org/10.1002/adem.202100709

IF: 3.6

2022-01-17

Advanced Engineering Materials

Abstract:Stir casting has been taken as a low cost and effective way to disperse ceramic particles in molten alloys and obtain the high‐performance metal matrix composites. However, the reinforcement precursors with a similar density to the molten aluminum are difficult to be uniformly dispersed in the melts. Herein, the particulate quartz, which can react with the aluminum melts and form the Al2O3/SiO2 reinforcement, is used as the reinforcement precursor. Effect of the stirring speeds of the melts and the feeding rates of precursor particles on the reinforcement distribution in aluminum matrix are investigated. The numerical simulation is carried out to analyze the particles dispersion course in the melts. Results show that the precursor particles in molten aluminum achieve a relatively uniform dispersion at the modest stirring rate of 400 rpm. Meanwhile, numerical simulation results also prove that precursor particles will distribute homogenously in the Al matrix while exerting the stirring rate at 400 rpm. From the microstructure of the composites, it is evident that extremely high stirring rate and particles feeding rate will lead to the agglomeration of particles, which is not favorable to the composites performance. To date, materials researchers are tirelessly developing the high‐performance aluminum matrix composites via stir casting method. In this study, the finite element simulations and the microstructure quantifications were carried out for understanding the effect of stirring rates and particles feeding rates on the dispersing behavior of the SiO2 particle precursor in the molten aluminum.

materials science, multidisciplinary