Abstract:Taking horizontal twin-roll casting mill as the research object, the geometric modeling and gridding of the rolling mill are completed by using the design modeler and gridding module of ANSYS Wrkbench platform. Combined with Fluent fluid simulation module, a two-dimensional steady-state laminar flow coupled model of copper-aluminium clad plate cast-rolling process was established. Through the analysis of range data obtained by orthogonal simulation design method, the order of importance of each factor is as follows: billet speed, cast-rolling zone length, preheating temperature of copper strip, pouring temperature. Through the analysis of factors and indicators (liquid hole depth ratio), the suitable technological parameters range are 0.3~0.6 m.min-1 for billet speed, 933~993 K for pouring temperature, 300~431 K for preheating temperature of copper strip, 57~80 mm for cast-rolling zone length. In order to verify the reliability of numerical simulation method and result analysis, the casting-rolling test was carried out with simulated process parameters. The exit temperature was measured by thermocouple. The results show that the error between simulation results and measured results is small, which verifies the accuracy of simulation and the feasibility of guiding production. When the billet speed is 0.5 m/min, the pouring temperature is 963 K, the length of casting-rolling zone is 70 mm and the copper strip is not preheated, the 10 mm thick copper-aluminium composite plate has better shape. The tensile properties show that the composite plate has both the high plasticity of aluminium and the high strength of copper.

Numerical simulation of continuous hot rolling process for ultra-thick SiCp/2009Al composites plate

EFFECTS OF HOT-ROLLING PROCESSES ON THE FRACTURE BEHAVIORS AND MECHANICAL PROPERTIES OF 2009Al/SiCp METAL MATRIX COMPOSITES

Effects of Hot Rolling on Microstructure and Properties of a 20 Vol.% SiC P /al Composite

Numerical simulation on recrystallization behavior and microstructure evolution during hot continuous rolling process of 38CrMoAl steel rod

Temperature Simulation of Single Pass Hot Rolling Process of Aluminum Alloy

Numerical Simulation of Cast-rolling Process for Copper-Aluminum Composite Plate

Stress Simulation and Rolling-thoroughness Analysis of Aluminum Alloy Plate in Conversable Hot Rolling

Continuous Finite Element Simulation of Plate Multi-pass Hot Roiling

Thermo-mechanical coupled simulation during rolling on aluminum alloys

Simulation and Finite Element Analysis of Continuous Multi-Pass Hot Rolled AZ31B Magnesium Alloy Sheets

Numerical Simulation of the Plate Rolling Process

Simulation of Multi-pass Hot Rolling Process of Direct-chilled AZ31B Magnesium Alloy

Numerical Simulation Research on the Temperature Field and Hot Roll Crown Model of Hot Continuous Rolling Mills

Effect of Hot Rolling on Microstructures and Mechanical Properties of SiCp/A356 Aluminum Matrix Composites

Microstructures and Properties of Al 27 % Si Composites : in Fl Uence of Rolling and Annealing

Numerical Simulation of Multi-Pass Hot Rolling of TA1/Q235B Clad Plates

The Three-Dimensioned Thermo-Mechanical Coupled Simulation Analysis of Hot Rolling Process of the Aluminum Alloy Strip

Study on Numerical Simulation of Thermal-stress Direct-coupling in Twin-roll Continuous Casting of Aluminum Alloys

Analysis of processing map and parameters optimization during hot extrusion of 17 vol.% SiCp/2009Al composite

Simulation of Temperature Field of Aluminum Alloy Super-thickness Plate During Hot Rolling

Numerical Simulation of Microstructure Evolution During Continuous Hot Rolling Process of GCr15 Steel Rod