Abstract:STATEMENT OF PROBLEM: The color of monolithic zirconia restorations is obtained by presintering or postsintering coloring techniques. However, studies on the differences in surface characteristics and their influence on color stability are lacking.PURPOSE: The purpose of this in vitro study was to evaluate the influence of shading and staining techniques for a zirconia ceramic on the surface characteristics and colorimetric parameters (color difference, translucency, and whiteness index) after exposure to coffee or red wine and then polishing.MATERIAL AND METHODS: Ceramic disks (N=30; Ø10×1 mm) were allocated into 3 groups: preshaded-shaded by the manufacturer (IPS e.max ZirCAD MT, shade A2); manually shaded-unshaded zirconia (IPS e.max ZirCAD MT, bleaching shade-BL) colored by the brushing technique, before sintering; stained-unshaded zirconia (IPS e.max ZirCAD MT BL) colored by the staining technique, after sintering. Spectrophotometric color assessments ensured the same initial perceived color (Vita Classical A2) for specimens included in the study (∆E00<1.77 acceptability threshold). Surface characteristics were assessed by scanning electron microscopy and atomic force microscopy. The specimens were immersed in coffee (n=5) or red wine (n=5) for 12 and 24 days and subsequently polished. The data were statistically and descriptively analyzed for color differences (∆E00), translucency parameters (TP00), and whiteness indexes for dentistry (WID), considering acceptability and perceptibility thresholds.RESULTS: The shaded groups found an irregular ceramic surface with uniformly sized zirconia crystals. The stained group found a glass-covered smoother surface. Significant alterations in color parameters (∆E00, TP00, WID) were observed with immersion in pigmenting beverages (P<.001) both after 12 days, and after 24 days. The shaded specimens had greater color alterations after immersion but benefited from the polishing procedure, which reduced color differences below an acceptable threshold in comparison with the baseline. Stained specimens had lower color alterations after immersion, but the polishing protocol was detrimental as it whitened the ceramic by subsurface exposure.CONCLUSIONS: The coloring technique influences the surface characteristics of zirconia ceramic and also the color parameters after exposure to colored beverages and polishing.

Effects of coloring agents applied during sintering on bending strength and hardness of zirconia ceramics

Effect of metal elements in coloring liquids used in the infiltration method on the physical properties of zirconia

Effect of coloring and sintering on the translucency and biaxial strength of monolithic zirconia

The effect of coloring liquid dipping time on the fracture load and color of zirconia ceramics

Influence of Restoration Thickness and Resin Cement on Translucency and Color of Different Types of Monolithic Zirconia and Lithium Disilicate Ceramic

Coloring Multilayer Zirconia May Affect Its Optical and Mechanical Properties

The effect of coloring liquids on the translucency of zirconia framework

Influence of coloring techniques on the surface characteristics and color stability of a monolithic zirconia ceramic

Research on the Coloration of Dental Zirconia

Evaluation of Shade Reproducibility and Mechanical Properties of Preshaded and Manually Shaded Monolithic Zirconia

Effect of staining time on the color of zirconia

Effect of Pigmentation on the Mechanical Properties and Microstructure of Dental 3Y-TZP Ceramics

Effects of Aging on the Mechanical Properties of Dental Pigmented 3Y-Tzp Ceramics

Effects of Coloring Liquid Dipping Time and Surface Finishing Procedures on the Optical Properties of Monolithic Zirconia

The influence of colored zirconia on the optical properties of all-ceramic restorations

Effects of added aluminum chromium slag on the structure and mechanical properties of colored zirconia ceramics

In vitro evaluation of tooth-colored yttria stabilized zirconia ceramics

Production and properties of tooth-colored yttria stabilized zirconia ceramics for dental applications

Study of colored on the microwave sintering behavior of dental zirconia ceramics

Influence of Sintering Process and Coloring Agents on Aging Properties of Dental Zirconia Ceramics

Influence of nanosilica coating on the color and the microleakage of zirconia ceramics