Abstract:Purpose To explore the impact of zirconia types, coloring methods, and surface finishing on the color stability of monolithic multilayered polychromatic zirconia after artificial aging, including thermocycling and simulated toothbrushing. Materials and Methods Eighty square‐shaped zirconia samples were divided into 2 types (M3Y‐TZP and M6Y‐PSZ), further categorized based on coloring methods (precolored and extrinsically colored) and surface finishing techniques (mechanical polishing or glazing). The color stability was assessed using the CIEDE2000 formula. Artificial aging was simulated via thermocycling and toothbrushing. All samples were analyzed with a spectrophotometer to determine the post‐aging color changes (ΔE00). The ΔE00 were interpreted and classified using the 50:50% perceptibility threshold (PT) and the 50:50% acceptability threshold (AT). Comparisons between groups for ΔE00 differences were performed using three‐way ANOVA, with pairwise comparisons facilitated by Fisher's protected least significant difference test, α = 0.05. Results The study results indicated significant impacts of zirconia type, coloring method, and surface finishing on color stability. The M6Y groups experienced significantly greater color changes (6.61 ± 1.63) compared to the M3Y groups (3.40 ± 2.24), p < 0.0001. For both types of zirconia, extrinsically colored samples exhibited significantly higher ΔE00 when mechanically polished (p = 0.004). However, surface finishing had no significant effect on ΔE00 in precolored samples of either zirconia material (p = 1.000). The evaluation and categorization of ΔE00 variations indicated that nearly all color changes in the M6Y groups, regardless of being precolored, extrinsically colored, polished, or glazed, were deemed extremely unacceptable (Grade 1). In contrast, the M3Y groups showed more acceptable results, with the majority of color changes classified as moderately unacceptable (Grade 3). Conclusions The color stability of multilayered polychromatic zirconia is influenced by the type of material, extrinsic coloring, and the chosen surface treatment post‐artificial aging. The translucent 6Y‐PSZ exhibited lower color stability, especially with only mechanical polishing. For the fabrication of M3Y‐TZP and 6Y‐PSZ monolithic multilayered polychromatic zirconia restorations, extrinsic coloring should be paired with glazing to maintain color stability. Conversely, in the absence of extrinsic coloring, both glazing and mechanical polishing are effective in preserving color stability.

Effect of staining time on the color of zirconia

Influence of Restoration Thickness and Resin Cement on Translucency and Color of Different Types of Monolithic Zirconia and Lithium Disilicate Ceramic

Effects of Coloring Liquid Dipping Time and Surface Finishing Procedures on the Optical Properties of Monolithic Zirconia

The effect of coloring liquid dipping time on the fracture load and color of zirconia ceramics

The effect of coloring liquids on the translucency of zirconia framework

Soak Colored Zirconia Ceramics and its Colorimetric Plate

Influence of coloring techniques on the surface characteristics and color stability of a monolithic zirconia ceramic

[Effect of veneering technologies on color and translucency of Y2O3 stabilized tetragonal zirconia polycrystals all-ceramic restorations].

The Effect of Firing Times on the Chroma of Tetragonal Zirconia Polycrystal by Adding Rare-Earth Oxides

Relationship between colorimetry and transparency of zirconia ceramic with clinical all-ceramic crown repair

Effect of metal elements in coloring liquids used in the infiltration method on the physical properties of zirconia

Staining and bleaching susceptibility of zirconia-reinforced lithium silicate glass-ceramics with different thicknesses, translucencies, and fabrication methods

Effect of toothbrushing with conventional and whitening dentifrices on monolithic zirconia after finishing procedures

[Effect of Five Kinds of Pigments on the Chromaticity of Dental Zirconia Ceramic].

Research on the Coloration of Dental Zirconia

Effect of Staining Solutions on Color and Translucency Stability of Resin-Composite Computer-Aided Design and Computer-Aided Manufacturing Blocks

Color stability of precolored and extrinsically colored monolithic multilayered polychromatic zirconia: Effects of surface finishing and aging

Effects of coloring agents applied during sintering on bending strength and hardness of zirconia ceramics

Influence of nanosilica coating on the color and the microleakage of zirconia ceramics

Effects of Three Illuminants on the Color of High Translucent Multilayered Zirconia

Effect of Fe2O3 Coloring Method on the Mechanical Property and Transparency Parameter of Dental 3Y-TZP.