Abstract:To solve the problems of the long development period, low mass transfer efficiency and high impurity content in the in-situ leaching process of weathered crust elution-deposited rare earth ores (WCE-DREO), cationic hydroxyethyl cellulose (PQ-10) was composited with conventional leaching agent ammonium sulfate ((NH 4 ) 2 SO 4 ) to form a novel composite leaching agent. The effects of PQ-10 concentration, leaching temperature and leaching flow rate of the composite leaching agent on the leaching kinetics and mass transfer processes of rare earth (RE) and aluminum (Al) were investigated. Compared to the single leaching agent (NH 4 ) 2 SO 4 , the composite leaching agent (2 wt% (NH 4 ) 2 SO 4 +0.02 wt% PQ-10) can reduce the RE leaching equilibrium time from 465 to 130 min and increase the RE leaching efficiency and decrease the Al leaching efficiency. It also facilitates the leaching process of WCE-DREO by increasing the peak concentrations of RE and Al, reducing the theoretical tower plate height (HETP) and improving the leaching mass transfer efficiency. It is indicated that PQ-10 can promote the leaching of WCE-DREO. The leaching process of the composite leaching system conforms to the diffusion kinetic control model. When the PQ-10 concentration is in the range of 0.005 wt% – 0.020 wt%, the reaction orders of RE and Al are 0.73 and 0.54, respectively, which shows a positive effect on the leaching velocity; when the PQ-10 concentration is in the range of 0.030 wt% – 0.060 wt%, the reaction orders of RE and Al are – 1.16 and – 0.75, respectively, which show a negative effect on the leaching velocity. In the range of 10 – 50 °C, the apparent activation energies of RE and Al are 15.02 and 17.31 kJ/mol, respectively, and the higher the leaching temperature, the smaller the HETP and the higher the leaching velocity and mass transfer efficiency. The increase in leaching flow rate contributes to the increase in the longitudinal diffusion velocity of the leaching agent within WCE-DREO, causing a shorter time for RE and Al to reach leaching equilibrium. In addition, the flow rate and HETP are consistent with the Van Deemter equation. At a flow rate of 0.8 mL/min, HETP was minimized and the optimal mass transfer efficiencies is achieved for RE and Al. Graphical abstract Compared with the conventional leaching agent 2.00 wt% (NH 4 ) 2 SO 4 , the leaching time is shortened by 70% and the mass transfer efficiency is greatly improved by using the composite leaching agent (0.02 wt% PQ-10 + 2.00 wt% (NH 4 ) 2 SO 4 ). Download : Download high-res image (217KB) Download : Download full-size image

Enhancement of weathered crust elution-deposited rare earth ores leaching process with the addition of PQ-10

Swelling inhibition and percolation promotion of PQ-10 on weathered crust elution-deposited rare earth ores

Leaching kinetics and permeability of polyethyleneimine added ammonium sulfate on weathered crust elution-deposited rare earth ores

Optimization of a Rare Earth and Aluminum Leaching Process from Weathered Crust Elution-Deposited Rare Earth Ore with Surfactant CTAB

Application of surfactant for improving leaching process of weathered crust elution-deposited rare earth ores

Leaching process assisted by cetyltrimethylammonium chloride for weathered crust elution-deposited rare earth ores: Leaching behavior, kinetic analysis and interfacial regulation

Leaching Behavior of Rare Earth Elements and Aluminum from Weathered Crust Elution-Deposited Rare Earth Ore with Ammonium Formate Inhibitor

Mass transfer in heap leaching of weathered crust elution deposited rare earth ore with Al2(SO4)3 solution

Vertical distribution and occurrence state of the residual leaching agent (ammonium sulfate) in the weathered crust elution-deposited rare earth ore

Leaching of rare earths and aluminum in weathered crust elution-deposited rare earth ore using magnesium sulfate: Effect of aluminum content in the leaching agent solution

Rare Earth Dissolution from Polishing Powder Waste in H2O2-H2SO4 System: Condition Optimization and Leaching Mechanism

Adsorption and desorption performances of ammonium on the weathered crust elution-deposited rare earth ore

Anti-swelling mechanism of DMDACC on weathered crust elution-deposited rare earth ore

Behavior and mechanism of different fraction lead leach with several typical sulfate lixiviants in the weathered crust elution-deposited rare earth ore

Efficient processing rare earth polishing powder solid waste by thiourea-H2SO4 system: Process optimization and thiourea decomposition effect

High sedimentation efficiency and enhanced rare earth recovery in the impurity removal process of rare earth leachate by flocculation system

Coordination–reduction leaching process of ion-adsorption type rare earth ore with ascorbic acid

Insights into selective leaching of rare earths from weathered crust elution-deposited rare earth ore using magnesium sulfate

Simultaneous Leaching of Rare Earth Elements and Phosphorus from a Chinese Phosphate Ore Using H3PO4

Leaching Tungsten and Rare Earth Elements from Scheelite Through H2SO4–H3PO4 Mixed Acid Decomposition

Scalable and facile fabrication of sulfonic-acid-functionalized porous hypercrosslinked polymers for efficient recovery of rare earth elements from tailing wastewater