Abstract:To solve the problems of the long development period, low mass transfer efficiency and high impurity content in the in-situ leaching process of weathered crust elution-deposited rare earth ores (WCE-DREO), cationic hydroxyethyl cellulose (PQ-10) was composited with conventional leaching agent ammonium sulfate ((NH 4 ) 2 SO 4 ) to form a novel composite leaching agent. The effects of PQ-10 concentration, leaching temperature and leaching flow rate of the composite leaching agent on the leaching kinetics and mass transfer processes of rare earth (RE) and aluminum (Al) were investigated. Compared to the single leaching agent (NH 4 ) 2 SO 4 , the composite leaching agent (2 wt% (NH 4 ) 2 SO 4 +0.02 wt% PQ-10) can reduce the RE leaching equilibrium time from 465 to 130 min and increase the RE leaching efficiency and decrease the Al leaching efficiency. It also facilitates the leaching process of WCE-DREO by increasing the peak concentrations of RE and Al, reducing the theoretical tower plate height (HETP) and improving the leaching mass transfer efficiency. It is indicated that PQ-10 can promote the leaching of WCE-DREO. The leaching process of the composite leaching system conforms to the diffusion kinetic control model. When the PQ-10 concentration is in the range of 0.005 wt% – 0.020 wt%, the reaction orders of RE and Al are 0.73 and 0.54, respectively, which shows a positive effect on the leaching velocity; when the PQ-10 concentration is in the range of 0.030 wt% – 0.060 wt%, the reaction orders of RE and Al are – 1.16 and – 0.75, respectively, which show a negative effect on the leaching velocity. In the range of 10 – 50 °C, the apparent activation energies of RE and Al are 15.02 and 17.31 kJ/mol, respectively, and the higher the leaching temperature, the smaller the HETP and the higher the leaching velocity and mass transfer efficiency. The increase in leaching flow rate contributes to the increase in the longitudinal diffusion velocity of the leaching agent within WCE-DREO, causing a shorter time for RE and Al to reach leaching equilibrium. In addition, the flow rate and HETP are consistent with the Van Deemter equation. At a flow rate of 0.8 mL/min, HETP was minimized and the optimal mass transfer efficiencies is achieved for RE and Al. Graphical abstract Compared with the conventional leaching agent 2.00 wt% (NH 4 ) 2 SO 4 , the leaching time is shortened by 70% and the mass transfer efficiency is greatly improved by using the composite leaching agent (0.02 wt% PQ-10 + 2.00 wt% (NH 4 ) 2 SO 4 ). Download : Download high-res image (217KB) Download : Download full-size image

Adsorption and desorption performances of ammonium on the weathered crust elution-deposited rare earth ore

Vertical distribution and occurrence state of the residual leaching agent (ammonium sulfate) in the weathered crust elution-deposited rare earth ore

Effects of Ammonium Salts on Rare Earth Leaching Process of Weathered Crust Elution-Deposited Rare Earth Ores

Application of surfactant for improving leaching process of weathered crust elution-deposited rare earth ores

Preparation of a Novel Macroporous Silica-Based 2,6-Bis(5,6-diisobutyl-1,2,4-triazine-3-yl)pyridine Impregnated Polymeric Composite and Its Application in the Adsorption for Trivalent Rare Earths

Efficient removal of the residual ammonium from weathered crust elution-deposited rare earth tailings by a ternary compound eluent

Role of Calcium Chloride on the Eluting Process of Residual Ammonium from Weathered Crust Elution-Deposited Rare Earth Ore Tailings

Leaching process assisted by cetyltrimethylammonium chloride for weathered crust elution-deposited rare earth ores: Leaching behavior, kinetic analysis and interfacial regulation

Leaching kinetics and permeability of polyethyleneimine added ammonium sulfate on weathered crust elution-deposited rare earth ores

Column leaching of ion adsorption rare earth ore at low ammonium concentration

Leaching Behavior of Rare Earth Elements and Aluminum from Weathered Crust Elution-Deposited Rare Earth Ore with Ammonium Formate Inhibitor

Leaching Process of Weathered Crust Elution-Deposited Rare Earth Ore With Formate Salts

Understanding the role of natural clay minerals as effective adsorbents and alternative source of rare earth elements: Adsorption operative parameters

Selective Recovery of Low-Concentration Light Rare Earth Ions from High-Concentration Ammonium Sulfate System by Coordination Ability

Anti-swelling mechanism of DMDACC on weathered crust elution-deposited rare earth ore

Insight into leaching of rare earth and aluminum from ion adsorption type rare earth ore: Adsorption and desorption

Inhibition on the swelling of clay minerals in the leaching process of weathered crust elution-deposited rare earth ores

Optimization of a Rare Earth and Aluminum Leaching Process from Weathered Crust Elution-Deposited Rare Earth Ore with Surfactant CTAB

Ammonia nitrogen sources and pollution along soil profiles in an in-situ leaching rare earth ore

Swelling inhibition and percolation promotion of PQ-10 on weathered crust elution-deposited rare earth ores

Enhancement of weathered crust elution-deposited rare earth ores leaching process with the addition of PQ-10