Abstract:To solve the problems of the long development period, low mass transfer efficiency and high impurity content in the in-situ leaching process of weathered crust elution-deposited rare earth ores (WCE-DREO), cationic hydroxyethyl cellulose (PQ-10) was composited with conventional leaching agent ammonium sulfate ((NH 4 ) 2 SO 4 ) to form a novel composite leaching agent. The effects of PQ-10 concentration, leaching temperature and leaching flow rate of the composite leaching agent on the leaching kinetics and mass transfer processes of rare earth (RE) and aluminum (Al) were investigated. Compared to the single leaching agent (NH 4 ) 2 SO 4 , the composite leaching agent (2 wt% (NH 4 ) 2 SO 4 +0.02 wt% PQ-10) can reduce the RE leaching equilibrium time from 465 to 130 min and increase the RE leaching efficiency and decrease the Al leaching efficiency. It also facilitates the leaching process of WCE-DREO by increasing the peak concentrations of RE and Al, reducing the theoretical tower plate height (HETP) and improving the leaching mass transfer efficiency. It is indicated that PQ-10 can promote the leaching of WCE-DREO. The leaching process of the composite leaching system conforms to the diffusion kinetic control model. When the PQ-10 concentration is in the range of 0.005 wt% – 0.020 wt%, the reaction orders of RE and Al are 0.73 and 0.54, respectively, which shows a positive effect on the leaching velocity; when the PQ-10 concentration is in the range of 0.030 wt% – 0.060 wt%, the reaction orders of RE and Al are – 1.16 and – 0.75, respectively, which show a negative effect on the leaching velocity. In the range of 10 – 50 °C, the apparent activation energies of RE and Al are 15.02 and 17.31 kJ/mol, respectively, and the higher the leaching temperature, the smaller the HETP and the higher the leaching velocity and mass transfer efficiency. The increase in leaching flow rate contributes to the increase in the longitudinal diffusion velocity of the leaching agent within WCE-DREO, causing a shorter time for RE and Al to reach leaching equilibrium. In addition, the flow rate and HETP are consistent with the Van Deemter equation. At a flow rate of 0.8 mL/min, HETP was minimized and the optimal mass transfer efficiencies is achieved for RE and Al. Graphical abstract Compared with the conventional leaching agent 2.00 wt% (NH 4 ) 2 SO 4 , the leaching time is shortened by 70% and the mass transfer efficiency is greatly improved by using the composite leaching agent (0.02 wt% PQ-10 + 2.00 wt% (NH 4 ) 2 SO 4 ). Download : Download high-res image (217KB) Download : Download full-size image

Application of surfactant for improving leaching process of weathered crust elution-deposited rare earth ores

Optimization of a Rare Earth and Aluminum Leaching Process from Weathered Crust Elution-Deposited Rare Earth Ore with Surfactant CTAB

Leaching process assisted by cetyltrimethylammonium chloride for weathered crust elution-deposited rare earth ores: Leaching behavior, kinetic analysis and interfacial regulation

Leaching kinetics and permeability of polyethyleneimine added ammonium sulfate on weathered crust elution-deposited rare earth ores

Swelling inhibition and percolation promotion of PQ-10 on weathered crust elution-deposited rare earth ores

Leaching Behavior of Rare Earth Elements and Aluminum from Weathered Crust Elution-Deposited Rare Earth Ore with Ammonium Formate Inhibitor

Effects of Ammonium Salts on Rare Earth Leaching Process of Weathered Crust Elution-Deposited Rare Earth Ores

The influence of surfactants on the acid leaching process of a uranium mine in Inner Mongolia

Leaching Process of Weathered Crust Elution-Deposited Rare Earth Ore With Formate Salts

Enhancement of weathered crust elution-deposited rare earth ores leaching process with the addition of PQ-10

The effect of surfactants on the efficiency and consumption reduction of acid stirred leaching of uranium ore

Efficient removal of the residual ammonium from weathered crust elution-deposited rare earth tailings by a ternary compound eluent

Adsorption and desorption performances of ammonium on the weathered crust elution-deposited rare earth ore

Vertical distribution and occurrence state of the residual leaching agent (ammonium sulfate) in the weathered crust elution-deposited rare earth ore

Experimental Study on the Influence of Surfactants on Ore Surface Wettability

Effective extraction and recovery of rare earth elements (REEs) in contaminated soils using a reusable biosurfactant

Inhibition on the swelling of clay minerals in the leaching process of weathered crust elution-deposited rare earth ores

Behavior and mechanism of different fraction lead leach with several typical sulfate lixiviants in the weathered crust elution-deposited rare earth ore

Anti-swelling mechanism of DMDACC on weathered crust elution-deposited rare earth ore

Leaching of rare earths and aluminum in weathered crust elution-deposited rare earth ore using magnesium sulfate: Effect of aluminum content in the leaching agent solution

Mass transfer in heap leaching of weathered crust elution deposited rare earth ore with Al2(SO4)3 solution