Abstract:Abstract Injecting carbon dioxide into oil reservoirs has the potential to serve as an enhanced oil recovery (EOR) technique, mitigating climate change by storing CO 2 underground. Despite the successful achievements reported of CO 2 to enhance oil recovery, mobility control is one of the major challenges faced by CO 2 injection projects. The objective of this work is to investigate the potential of using surfactant and a mixture of surfactant and nanoparticles to generate foam to reduce gas mobility and enhance oil recovery. A newly developed anionic surfactant and a mixture of the surfactant and surface-modified silica nanoparticles were used to assess the ability of generating a stable foam at harsh reservoir conditions: sc-CO 2 and high temperature. Dynamic foam tests and coreflood experiments were conducted to evaluate foam stability and strength. To measure the mobility of injected fluids in sandstone rocks, the foam was generated by co-injection of sc-CO 2 and surfactant, as well as a mixture of surfactant and nanoparticles at 90% quality. The coreflood experiments were conducted using non-fractured and fractured sandstone cores at 1550 psi and 50 °C. The use of surfactant and mixture was able to generate foam in porous media and reduce the CO 2 mobility. The mobility reduction factor (MRF) for both cases was about 3.5 times higher than that of injecting CO 2 and brine at the same conditions. The coreflood experiments in non-fractured sandstone rocks showed that both surfactant and a mixture of surfactant and nanoparticles were able to enhance oil recovery. The baseline experiment in the absence of surfactant resulted in a total recovery of 71.50% of the original oil in place. However, the use of surfactant was able to bring oil recovery to 76% of the OOIP. The addition of nanoparticles to surfactant, though, resulted in higher oil recovery, 80% of the OOIP. In fractured rocks, oil recoveries during secondary production mechanisms for the mixture, the surfactant alone, and sc-CO 2 alone were 12.62, 8.41, and 7.21% of the OOIP, respectively. Huge amount of oil remains underground following the primary and secondary oil production schemes. CO 2 has been widely used to enhance oil recovery. However, its high mobility might result in unfavorable and unsuccessful projects. The use of specially designed surfactants and the synergistic effect of surfactant and nanoparticles may provide a solution to stabilize CO 2 /brine foam at harsh reservoir conditions and, therefore, reduce the gas mobility and, consequently, enhance oil recovery.

Ethanol enhanced anionic surfactant solubility in CO2 and CO2 foam stability: MD simulation and experimental investigations

Promoting dissolution behaviors of low-carbon alcohol polyoxyethylene polyoxypropylene ether in CO 2 by molecular structure optimization and adding cosolvent

Interfacial properties and foam performance of alpha olefin sulfonate and CO2 switchable aminopropyl methyl siloxane surfactant mixtures

A Novel Supercritical CO2 Foam System Stabilized With a Mixture of Zwitterionic Surfactant and Silica Nanoparticles for Enhanced Oil Recovery

CO2 in water foam stabilized with CO2-dissolved surfactant at high pressure and high temperature

Review of Foam with Novel CO2-Soluble Surfactants for Improved Mobility Control in Tight Oil Reservoirs

Research of CO2-Soluble Surfactants for Enhanced Oil Recovery: Review and Outlook

Foam formation in aqueous-ethanol system triggered by the ABA triblock siloxane surfactant

Evaluation of the interfacial elasticity of surfactant monolayer at the CO 2 –water interface by molecular dynamics simulation: Screening surfactants to enhance the CO 2 foam stability

The CO2-in-water foam stabilized with the mixture of CO2-soluble surfactant and nonionic surfactant

Modified silica nanoparticles stabilized foam for enhanced oil recovery

An Experiment and Molecular Dynamics Simulation of Synergistic Foaming between a Surfactant and CO2 and the Structure–Activity Effect

Molecular dynamics simulation of the synergistic effect of a compound surfactant on the stability of CO2 oil‐based foam

Investigation of the Stability Mechanism of Stimulus-Responsive Wormlike Micelle-CO2 Foams in the Oil Phase

Surfactant and a mixture of surfactant and nanoparticles to stabilize CO2/brine foam, control gas mobility, and enhance oil recovery

CO2-Soluble Ionic Surfactants and CO2 Foams for High-Temperature and High-Salinity Sandstone Reservoirs

Experimental investigation on the spread of aqueous foam over ethanol surface

Static and dynamic foam/oil interactions: Potential of CO2-philic surfactants as mobility control agents

Molecular dynamics simulation on CO2 foam system with addition of SiO2 nanoparticles at various sodium dodecyl sulfate (SDS) concentrations and elevated temperatures for enhanced oil recovery (EOR) application

CO2-responsive surfactant for oil-in-water emulsification and demulsification from molecular perspectives

Mechanism of enhanced oil recovery of ultra-dry CO 2 -in-water foams in porous media: Experiments and numerical simulation