Abstract:Solid-state batteries (SSBs) can offer a paradigm shift in battery safety and energy density. Yet, the promise hinges on the ability to integrate high-performance electrodes with state-of-the-art solid electrolytes. For example, lithium (Li) metal, the most energy-dense anode candidate suffers from severe interfacial chemomechanical issues that lead to cell failure. Li alloys of In/Sn are attractive alternatives, but their exploration has mostly been limited to the low capacity (low Li content) and In-rich LixIn (x ≤ 0.5) systems. Here, the fundamental electro-chemo-mechanical behavior of Li–In and Li–Sn alloys of varied Li stoichiometries is unraveled in sulfide electrolyte-based SSBs. The intermetallic electrodes developed through a controlled synthesis and fabrication technique display impressive (electro)chemical stability with Li6PS5Cl as the solid electrolyte and maintain nearly perfect interfacial contact during the electrochemical Li insertion/deinsertion under an optimal stack pressure. Their intriguing variation in the Li migration barrier with composition and its influence on the observed Li cycling overpotential is revealed through combined computational and electrochemical studies. Stable interfacial chemomechanics of the alloys allow long-term dendrite free Li cycling (>1000 h) at relatively high current densities (1 mA cm–2) and capacities (1 mAh cm–2), as demonstrated for Li13In3 and Li17Sn4, which are more desirable from a capacity and cost consideration compared to the low-Li-content analogues. The presented understanding can guide the development of high-capacity Li–In/Sn alloy anodes for SSBs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.chemmater.1c01431.Additional experimental details; diffraction pattern of the Li–In and Li–Sn alloys; SEM micrographs of the alloys and the fabricated electrodes; resistance of the SE pellets; stack resistance of A|Li6PS5Cl|A (A = Li, In, Li0.5In, LiIn, Li13In3 Li2Sn5, or Li17Sn4) cells; stripping and plating performance of metallic lithium and long-term stripping and plating performance of cells assembled with Li0.5In and LiIn; computational details; a list of the compound studied with modeling, their provenance, and the definition of the formation energy; and the additional Li migration barriers in selected alloys (PDF)This article has not yet been cited by other publications.

Enhanced Electrochemical Stability and Extended Cycle Life in Sulfide‐Based All‐Solid‐State Batteries: The Role of Li10SnP2S12 Coating on Ni‐Rich NCM Cathode (Small 11/2024)

LiNi0.5Mn1.5O4 cathode microstructure for all-solid-state batteries

LiNi 0.5 Mn 1.5 O 4 Cathode Microstructure for All-Solid-State Batteries.

Enhanced Electrochemical Stability and Extended Cycle Life in Sulfide-Based All-Solid-State Batteries: The Role of Li10 SnP2 S12 Coating on Ni-Rich NCM Cathode

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Engineering Stable Decomposition Products on Cathode Surfaces to Enable High Voltage All‐Solid‐State Batteries

Elevating Cycle Stability and Reaction Kinetics in Ni‐Rich Cathodes Through Tailored Bulk and Interface Chemistry for Sulfide‐Based All‐Solid‐State Lithium Batteries

High‐Capacity, Long‐Life Sulfide All‐Solid‐State Batteries with Single‐Crystal Ni‐Rich Layered Oxide Cathodes

Heuristic Design of Cathode Hybrid Coating for Power‐Limited Sulfide‐Based All‐Solid‐State Lithium Batteries

Favorable Interfacial Chemomechanics Enables Stable Cycling of High Li-Content Li-In/Sn Anodes in Sulfide Electrolyte Based Solid-State Batteries

A Catalyst SnO2 Improves the Performance of All-Solid-State Batteries with LiNi0.5Mn1.5o4@SnO2 Cathodes, Pmma-Pvdf@ Li1.3ai0.3ti1.7(Po4)3 Composite Solid Electrolyte and Lithium Metal Anodes

Long-Lasting Solid Electrolyte Interphase for Stable Li-Metal Batteries

Single-Crystal-Layered Ni-Rich Oxide Modified by Phosphate Coating Boosting Interfacial Stability of Li10 SnP2 S12 -Based All-Solid-State Li Batteries.

A Plastic-Crystal Electrolyte Layer Promotes Interfacial Stability of Ni-Rich Oxide Cathode in Li6PS5Cl-Based All-Solid-State Rechargeable Li Batteries

Profiting the Co-Modifications of Li 2 SnO 3 Coating and Sn 4+ Doping in Co-Free Ni-Rich Cathode Particles for Lithium-Ion Batteries

High Lithium-Ion Conductivity, Halide-Coated, Ni-Rich NCM Improves Cycling Stability in Sulfide All-Solid-State Batteries

Stabilizing Effect of a Hybrid Surface Coating on a Ni-Rich NCM Cathode Material in All-Solid-State Batteries

Enabling superior electrochemical performances of Li10SnP2S12-based all-solid-state batteries using lithium halide electrolytes

Favorable Interfacial Chemomechanics Enables Stable Cycling of High-Li-Content Li–In/Sn Anodes in Sulfide Electrolyte-Based Solid-State Batteries

Achieving stable all-solid-state lithium-metal batteries by tuning the cathode-electrolyte interface and ionic/electronic transport within the cathode

A gradient oxy-thiophosphate-coated Ni-rich layered oxide cathode for stable all-solid-state Li-ion batteries