Abstract:The goal of this study was to validate accuracy and reproducibility of a new 2D/3D reconstruction-based program called “HipRecon” for determining cup orientation after THA. “HipRecon” uses a statistical shape model based 2D/3D deformable registration technique that can reconstruct a patient-specific 3D model from a single standard AP pelvic X-ray radiograph. Required inputs include a digital radiograph, the pixel size, and the film-to-source distance. No specific calibration of the X-ray, or a CAD (computer-assisted design) model of the implant, or a CT-scan of the patient is required. Cup orientation is then calculated with respect to the anterior pelvic plane that is derived from the reconstructed 3D-model. The validation study was conducted on datasets of 29 patients (31 hips). Among them, there were 15 males and 14 females. Each dataset has one post-operative X-ray radiograph and one post-operative CT-scan. The post-operative CT scan for each patient was used to establish the ground truth for the cup orientation. Radiographs with deep centering (7 radiographs), or of pelvises with fractures (2 radiographs), or with both (1 radiograph), or of non-hemispherely shaped cup (1 radiograph) were assessed separately from the radiographs without above mentioned phenomena (18 radiographs) to estimate a potential influence on the 2D/3D reconstruction accuracy. To make the description easier, we denote those radiographs with above mentioned phenomena as non-normal cases and those without as normal cases. The cup anteversions and inclinations that were calculated by “HipRecon” were compared to the associated ground truth. To validate the reproducibility and the reliability, one observer conducted twice measurements for each dataset using “HipRecon”. The mean accuracy for the normal cases was 0.4° ± 1.8° (−2.6° to 3.3°) for inclination and 0.6° ± 1.5° (−2.0° to 3.9°) for anteversion, and the mean accuracy for the non-normal cases was 2.3° ± 2.4° (−2.1° to 6.3°) for inclination and 0.1° ± 2.8° (−4.6° to 5.1°) for anteversion. Comparing the measurement from the normal radiographs to those from the non-normal radiographs using the Mann-Whitney U-test, we found a significant difference in measuring cup inclination (p = 0.01) but not in measuring cup anteversion (p = 0.3). Bland-Altman analysis of those measurements from the normal cases indicated that no systematical error was detected for “HipRecon,” as the mean of the measurement pairs were spread evenly and randomly for both inclination and anteversion. “HipRecon” showed a very good reproducibility for both parameters with an intraclass correlation coefficient (ICC) for inclination of 0.98 (95% Confidence Limits (CL): 0.96–0.99) and for anteversion of 0.96 (95% CL: 0.91–0.98). Accurate assessment of the acetabular cup orientation is important for evaluation of outcome after THA, but the inability to measure acetabular cup orientation accurately limits one9s ability to determine optimal cup orientations, to assess new treatment methods of improving acetabular cup orientation in surgery, and to correlate the acetabular cup orientation to osteolysis, wear, and instability. In this study, we showed that “HipRecon” was an accurate, consistent, and reproducible technique to measure cup orientation from post-operative X-ray radiographs. Furthermore, our experimental results indicated that the best results were achieved with the radiographs of non-fractured pelvises that included the anterior superior iliac spines and the cranial part of the non-fractured pelvis. Thus, it is recommended that these landmarks should be included in the radiograph whenever the 2D/3D reconstruction-based method will be used

Superior bone fixation of conical compared with hemispherical trapezial cup design: an experimental radiostereometry study

Computer-simulated TOUCH prosthesis cup malposition and solutions

Biomechanical Research on Contour Cage with Transacetabular Screws Fixation in Revision Total Hip Arthroplasty.

Analysis of trapeziometacarpal prosthesis cup position with respect to the trapezial anatomy

The Biomechanical Study of Intertrochanic Fractures Treated with Cemented Femoral Stem

Proposed Radiographic Parameters to Optimize Clinical Outcomes in Trapezio-Metacarpal Prosthesis Placement Using CT Imaging, with 1-Year Follow-Up

Influence of the anatomy of the proximal articular surface of the trapezium (PAST) and the trapezoidal articular surface of the trapezium (TRAST) in cup placement during trapeziometacarpal arthroplasty

Validation of a statistical shape model-based 2D/3D reconstruction method for determination of cup orientation after THA

Finite element analysis part 2 of 2: Glenohumeral bone stress distribution depends on implant configuration for anatomic and reverse stemless shoulder implants

Establishment Of A Three-Dimensional Finite Element Model And Biomechanical Analysis Of Three Different Internal Fixation Methods For Humeral Greater Tuberosity Fracture

Patient-specific finite element analysis of four different fixation methods for transversely unstable radial head fractures

Press-fit acetabular cup fixation: Principles and testing

Biomechanical comparison of different internal fixation devices for transversely unstable Mason type II radial head fractures

Comparison of Test Setups for the Experimental Evaluation of the Primary Fixation Stability of Acetabular Cups

Locking Plates With Computationally Enhanced Screw Trajectories Provide Superior Biomechanical Fixation Stability of Complex Proximal Humerus Fractures

Evaluation of grafts fixation techniques for temporomandibular joint reconstruction with medial femoral condyle flap: A numerical study

[Comparative biomechanical study of 3 types of osteosynthesis of the Duparc grade IV fractures of the calcaneus: value of triangular internal fixation]

Evaluation of Internal Fixation Techniques for Extracapsular Fracture: A Finite Element Analysis and Comparison.

Model-based roentgen stereophotogrammetric analysis using elementary geometrical shape models: 10 years results of an uncemented acetabular cup component

VALIDATION OF A NEW 2D/3D RECONSTRUCTION-BASED PROGRAM FOR DETERMINATION OF CUP ORIENTATION AFTER THA

The Stability Evaluation of Two Internal Fixation Patterns of Extracapsular Condylar Fracture Based on One Novel Measuring Method.