Abstract:Lithium metal anode is recognized as the "Holy Grail" electrode because of its high specific capacity (3860 mAh/g) and low reduction potential (-3.04 V vs. standard hydrogen electrode), which is meaningful for batteries systems. Remarkable improvement of ionic conductivity of sulfide electrolyte exceeding 10 mS/cm at room temperature has opened up the opportunity to realized the commercialization of lithium metal anode. However, the practical implement of Li anode in solid-state batteries is hundered by the poor cycle stability and the low energy efficiency stemming from the unstable interfaces due to the ultrahigh reactivity of lithium metal. At the anode interface, the lithium dendrite growth and solid electrolytes (SE) reduction by lithium metal are serious challenges for lithium metal anode. To suppress the interfacial reactions and lithium dendrite formation at the sulfide electrolyte/Li metal anode interface, various strategies have been implemented by researchers, such as in situ formed robust SEI (solid electrolyte interface), surface modification and SE modification, etc. In this article, we focus on the artificial solid electrolyte interface (ASEI) to strengthening the Li metal and solid electrolyte interface. We fabricate the uniform LiF-rich ASEI using CF3(CF2)(3)OCH3 by heating at a temperature of 150 degrees C for 6 h. LiF layer at the interface between Li and sulfide electroyte could prevent Li dendrite growth. Compared to the Li/sulfide electrolyte interface, the Li/LiF/sulfide electrolyte interface is more stable. The symmetrical cell LiF@Li//Li6PS5Cl//LiF@Li (LiF@Li//LPSCl//LiF@Li) does not short-circuit after 40 cycles at the current density of 0.1 mAh/cm(2) with a lower polarization potential. A solid-state battery LiNbO2@LiCoO2//LPSCl//LiF@Li (LNO@LCO//LPSCl//LiF@Li) employing LiF coated Li metal as anode shows a high reversible discharge capacity of 138.4 mAh/g at 0.05 C and retains 110.9 mAh/g after 50 cycles. This interficial engineering for lithium metal and sulfide solid electrolyte provides new opportunity to commercialize the Li metal batteries.

Ag nanoparticles incorporated interlayer enables ultrahigh critical current density for Li6PS5Cl-based all-solid-state lithium batteries

Ag-modification argyrodite electrolytes enable high-performance for all-solid-state lithium metal batteries

An Interconnected Silver Coated Carbon Cloth Framework As a Host to Reduce Lithium Nucleation Over-Potential for Dendrite-Free Lithium Metal Anodes

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

In Situ Formed Li–Ag Alloy Interface Enables Li 10 GeP 2 S 12 -Based All-Solid-State Lithium Batteries

Cross-Linked Polyamide-Integrated Argyrodite Li6PS5Cl for All-Solid-State Lithium Metal Batterie

In-situ construction of Li-Ag/LiF composite layer for long cycled all-solid-state Li metal battery

Ultra-homogeneous Dense Ag Nano Layer Enables Long Lifespan Solid-State Lithium Metal Batteries

Lithium anode interlayer design for all-solid-state lithium-metal batteries

A Self‐Reconfigured, Dual‐Layered Artificial Interphase Towards High‐Current‐Density Quasi‐Solid‐State Lithium Metal Batteries

Engineering Lithiophilic Silver Sponge Integrated with Ion-Conductive PVDF/LiF Protective Layer for Dendrite-Free and High-Performance Lithium Metal Batteries

Toward Ultrastable Metal Anode/Li 6 PS 5 Cl Interface via an Interlayer as Li Reservoir

Li 3 N interlayer enables stable long-term cycling for sulfide-based all-solid-state Li metal batteries

Li5.5PS4.5Cl1.5-Based All-Solid-State Battery with a Silver Nanoparticle-Modified Graphite Anode for Improved Resistance to Overcharging and Increased Energy Density

In Situ Formed Protective Layer: Toward a More Stable Interface between the Lithium Metal Anode and Li 6 PS 5 Cl Solid Electrolyte

Interficial Engineering of Lithium Metal Anode for Sulfide Solid State Batteries

Interfacial Modification Between Argyrodite-Type Solid-State Electrolytes and Li Metal Anodes Using LiPON Interlayers

High‐Performance Garnet‐Type Solid‐State Lithium Metal Batteries Enabled by Scalable Elastic and Li+‐Conducting Interlayer

In Situ Formation Of A Li3n-Rich Interface Between Lithium And Argyrodite Solid Electrolyte Enabled By Nitrogen Doping

A Plastic-Crystal Electrolyte Layer Promotes Interfacial Stability of Ni-Rich Oxide Cathode in Li6PS5Cl-Based All-Solid-State Rechargeable Li Batteries

Stabilizing Li7P3S11/lithium metal anode interface by in-situ bifunctional composite layer