Abstract:Direct methanol fuel cells (DMFCs) are attractive among advanced energy conversion technologies due to the high energy density of methanol, the overall simplicity of system and easy refueling.[1] Although they made an early market entry but did not achieve large-scale commercialization mainly because of the cost, performance and durability issues. The state-of-art DMFC systems are based on the use of Pt-Ru catalyst at the anode, Pt catalyst at the cathode, and a polymer electrolyte membrane separating the two electrodes.[2] Our present study is focused on the anode catalyst, specifically to improve its performance and durability and reduce its cost. To this end, we have examined the use of titanium oxide-ruthenium oxide solid solutions as co-catalyst supports. We have prepared Pt/Ti0.7Ru0.3O2 for use as an anode catalyst. Ti0.7Ru0.3O2 as a co-catalyst support was synthesized in a one-step hydrothermal process and then platinum was deposited using polyol method. The structure of the synthesized catalyst was investigated by XRD, SEM and EDX. Results of steady-state voltammetry suggest that the electrocatalytic activity and stability of the newly synthesized catalysts compare well with the commercially available carbon-supported Pt-Ru catalyst. The Tafel slopes suggested that the well-known bifunctional mechanism for methanol oxidation was operative on the new catalyst as well. With further optimization of this type of catalyst we expect to be able to lower the noble metal content further to enable practical use of these materials in fuel cells. References [1] S. Surampudi, S. R. Narayanan, E. Vamos, H. Frank, G. Halpert, A. LaConti, J. Kosek, G. K. Surya Prakash and GA Olah, "Advances in Direct Oxidation Methanol Fuel Cells," Journal of Power Sources, 47, 377-385 (1994) [2] Handbook of Fuel Cells, “Portable Direct Methanol Fuel Cell Systems”, S. R. Narayanan, T. I.Valdez, in Vol IV Part 1, (Eds. H. Gasteiger, A. Lamm and W. Veilstich), Wiley Interscience ( March 2003)

Direct methane protonic ceramic fuel cells with self-assembled Ni-Rh bimetallic catalyst

Highly Active Nanoporous Pt-based Alloy As Anode and Cathode Catalyst for Direct Methanol Fuel Cells

Anode-Engineered Protonic Ceramic Fuel Cell with Excellent Performance and Fuel Compatibility

Infiltrated Ni0.08Co0.02Ce0.02CeO2-x@Ni0.8Co0.2 Catalysts for a Finger-Like Anode in Direct Methane-Fueled Solid Oxide Fuel Cells

Internal and External Cooperation of Pt/SiC-Ni Catalyst Affording Unexpected Performance of Direct Methanol Fuel Cell

Enhanced stability of a direct-methane and carbon dioxide protonic ceramic fuel cell with a PrCrO3 based reforming layer

High performance of direct ethanol-fueled protonic ceramic fuel cells via ethanol steam reforming using non-noble metal catalysts

Direct-methane Solid Oxide Fuel Cells with an in Situ Formed Ni–Fe Alloy Composite Catalyst Layer over Ni–YSZ Anodes

Methane-fueled SOFC with Traditional Nickel-Based Anode by Applying Ni/Al2O3 As a Dual-Functional Layer

Ceria coated Ni as anodes for direct utilization of methane in low-temperature solid oxide fuel cells

Infiltrated Ni 0.08 Co 0.02 CeO 2– x @Ni 0.8 Co 0.2 Catalysts for a Finger-Like Anode in Direct Methane-Fueled Solid Oxide Fuel Cells

Highly durable, coking and sulfur tolerant, fuel-flexible protonic ceramic fuel cells

Electricity Generation in Dry Methane by a Durable Ceramic Fuel Cell with High-Performing and Coking-Resistant Layered Perovskite Anode

A NiFeCu alloy anode catalyst for direct-methane solid oxide fuel cells

Samaria-doped Ceria Modified Ni/YSZ Anode for Direct Methane Fuel in Tubular Solid Oxide Fuel Cells by Impregnation Method

Enhance coking tolerance of high-performance direct carbon dioxide-methane solid oxide fuel cells with an additional internal reforming catalyst

Catalytic Activity of Ni-YSZ Composite As Anode for Methane Oxidation in Solid Oxide Fuel Cells

Improved Catalysts for Direct Methanol Fuel Cells

Two 3D Structured Co-Ni Bimetallic Oxides As Cathode Catalysts for High-Performance Alkaline Direct Methanol Fuel Cells

Catalytic Modification of Ni–Sm-doped Ceria Anodes with Copper for Direct Utilization of Dry Methane in Low-Temperature Solid Oxide Fuel Cells

Direct-Methane Solid Oxide Fuel Cells with Hierarchically Porous Ni-Based Anode Deposited with Nanocatalyst Layer