Abstract:The paper investigates the characteristics of the laser beam percussion micro-drilling (LBPMD) process in aerospace nickel-based superalloy Hastelloy X using microsecond pulses. The quality of the drilled hole is crucial in laser beam micromachining, and selecting appropriate process parameters significantly impacts the hole's quality. The objective is to achieve predefined hole dimensions with minimal taper angles. Additionally, the study focuses on the alteration of pulse width, which is a combination of laser pulse frequency and duty cycle. Laser power ( P ), duty cycle % ( D ), focal plane position ( FPP ), and laser frequency ( f ) are considered input parameters, while geometric features such as inlet and outlet diameters, hole taper angle, and inlet circularity are examined as process responses. ANOVA is employed to establish significant relationships between process parameters and response variations based on experimental tests. Creating a precise simulation model that accurately accounts for the moving boundary of the target material's receding surface is a crucial and challenging task in formulating the laser heat conduction problem. It is necessary to simultaneously capture the material's dynamic front movement and update the boundary conditions of the laser source. To model the micro-drilled hole with LBPMD, the UMESHMOTION and DFLUX subroutines, along with the arbitrary Lagrangian-Eulerian (ALE) adaptive remesh algorithm in the AbaqusTM software, are utilized. Notably, no previous numerical study has predicted the geometry of micro-drilled holes using this technique. The proposed procedure is validated through the predictions of inlet and outlet hole diameters. Special emphasis is placed on the validation of models. Consequently, the numerical model and statistical model are compared as well as the need to define model applicability. The study demonstrates that all input parameters significantly influence the inlet hole diameter, while the pulse width notably affects the taper angle and circularity. The interaction between high laser frequency and low duty cycle results in reduced pulse duration. Multi-objective optimization is performed to determine the optimal process parameter settings for desired quality characteristics, considering minimum hole taper angle, precise inlet diameter, and maximum inlet circularity of the hole as optimization criteria. The findings show that with the optimized predicted results obtained from the optimal input variables, a composite desirability of 92% can be achieved.

Computational approach for structural and thermal behavior of laser-machined micro-grooves on alumina ceramic using ANSYS

Transient Ablation Model for Laser Machining Polymer Microfluidic Chip

Dynamic Interface for Three-Dimensional Transient Laser Ablation Polymer Microchannels

Multiscale Finite Element Modeling of Alumina Ceramics Undergoing Laser-Assisted Machining

3d Finite Element Modeling Of Laser Machining Pmma

Investigation of thermal effects of laser micromachining for APT and TEM specimen preparation: A modeling and experimental study

Optimizing laser-based micro-cutting for PMMA microfluidic device fabrication: thermal analysis and parameter optimization

Laser additive manufacturing of bulk and powder ceramic materials: mathematical modeling with experimental correlations

A novel numerical modeling of microsecond laser beam percussion micro-drilling of Hastelloy X: experimental validation and multi-objective optimization

Machine learning approach for prediction analysis of aluminium alloy on the surface roughness using CO2 laser machining

Exploring the machining characteristics of aluminum 6061 using nanosecond pulse fiber laser machine

Numerical and experimental investigations to analyze the micro-hole drilling process in spark-assisted chemical engraving (SACE)

Prediction analysis and an experimental investigation of precision process of CO 2 -laser micro-turning for Armox 500 T accompanied via N 2 gas

Machining of aluminium nitride ceramic using developed hot abrasive jet machining: an experimental and simulation approach

Laser Ablation Study of Cutting Ceramics with Consideration of the Beam Inclination Angle

A REVIEW ON LASER MACHINING OF ALUMUNIA CERAMIC

Thermal analysis of in-situ laser assisted diamond cutting of fused silica and process optimization

Analytical Modelling of Scanning Strategy Effect on Temperature Field and Melt Track Dimensions in Laser Powder Bed Fusion

Microstructure evolution and ablation mechanism of SiCf/SiC ceramic matrix composite microgrooves processed by pico-second laser

Computational Modeling and Experimental Validation of Thermal Stress and Melt Pool Characteristics Using High Power Laser Diode Beam on 7075 Aluminum Alloy

Machine learning-driven process of alumina ceramics laser machining