Abstract:ConspectusCarbon dioxide (CO2) capture and storage (CCS) is a means to enable the continued use of fossil fuels in the short term. In particular, postcombustion CO2 capture has attracted considerable attention because it can be retrofitted into existing power plants and industrial plants. Among various CO2 capture technologies, the absorption of CO2 using aqueous amines has been industrially employed for decades. However, such amine scrubbing technologies have inherent limitations of environmental and health concerns due to volatile amine loss, corrosion, and high energy demands for regeneration. To overcome these limitations, CO2 adsorption using solid adsorbents has emerged as a promising alternative due to its noncorrosiveness and low energy demand. Various amine-containing adsorbents have been synthesized and investigated for postcombustion CO2 capture. These materials are prepared by physically impregnating low-vapor-pressure amine polymers or by chemically grafting amines onto nanoporous materials. A wide variety of amine guests and nanoporous hosts (e.g., SiO2, Al2O3, zeolites, MOFs, and polymers) have been combined to develop advanced CO2 adsorbents.The design of CO2 adsorbents is a multifaceted puzzle that must ultimately consider integration with large-scale CO2 capture processes. Various engineering aspects need to be carefully considered. Unfortunately, a significant proportion of previous studies has primarily focused on the use of novel materials for improving the CO2 adsorption capacity. In this Account, we describe key challenges and solutions to develop energy-efficient and stable amine-containing adsorbents for postcombustion CO2 capture via temperature swing adsorption (TSA). We found that a high CO2 working capacity, often overemphasized in the literature, does not necessarily guarantee a low energy demand for CO2 capture. Suppressing coadsorption of H2O during the CO2 adsorption in humid flue gas is also a significant factor. Amine-containing adsorbents can be degraded through various pathways, including hydrothermal degradation of nanoporous hosts and chemical degradation of amine guests via urea formation and oxidation. To inhibit such degradation pathways, it is extremely important to properly design the nanoporous structures of the hosts and the molecular structures of the amine guests. By combining macroporous silica hosts, poly(ethylenimine) (PEI) functionalized with various alkyl epoxides, and phosphate-based oxidative stabilizers, we could synthesize adsorbents exhibiting low energy demands for CO2 capture and unprecedentedly high thermochemical stability under TSA conditions. The macroporous silica host synthesized by assembling fumed silica particles via spray-drying exhibited high hydrothermal stability and enabled uniform distribution of bulky amine polymers within its pores. The functionalization of PEI with alkyl epoxides converted its primary amines into hindered secondary amines, leading to a significant reduction in energy demand for TSA cycles and a remarkable improvement in long-term stabilities. The oxidative stability of amines could be drastically improved by adding phosphate metal-binding reagents, which can poison ppm-level metal impurities that catalyze amine oxidation. The present discussions will provide important insights into designing practical adsorbents for CO2 capture from engineering perspectives.

Post‐Synthetic Covalent Grafting of Amines to NH2‐MOF for Post‐Combustion Carbon Capture

A Two Step Postsynthetic Modification Strategy: Appending Short Chain Polyamines to Zn-NH2-BDC MOF for Enhanced CO2 Adsorption

Diamine-appended metal-organic framework for carbon capture from wet flue gas: Characteristics and mechanism

Design of Amine-Containing Nanoporous Materials for Postcombustion CO2 Capture from Engineering Perspectives

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Ultra-highly Efficient Adsorbent for CO2 Capture from Air by Directional Deprotonation Regulation of MOFs-based Amine Grafting

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

High-Selective CO2 Capture in Amine-Decorated Al-MOFs

CO2 Capture by the Amine-modified Mesoporous Materials

Carbon dioxide adsorption/desorption performance of single- and blended-amines-impregnated MCM-41 mesoporous silica in post-combustion carbon capture

Incorporation of Amino Acid-Functionalized Ionic Liquids into Highly Porous MOF-177 to Improve the Post-Combustion CO2 Capture Capacity

Modified Metal-Organic Framework by a Novel Coordinatively Unsaturated Amine Grafting Mechanism for Direct Air Capture of Co2

Amine-grafted MIL-101(Cr) and Cu-BTC via post-synthetic modification for synergistic enhancement of CO 2 uptake

Amine and Fluorine Co-Functionalized Mil-101(Cr) Synthesized Via a Mixed-Ligand Strategy for Co2 Capture Under Humid Conditions

Functionalization of Ordered Mesoporous Silica (MCM-48) with Task-Specific Ionic Liquid for Enhanced Carbon Capture

Aminosilanes grafted to basic alumina as CO2 adsorbents--role of grafting conditions on CO2 adsorption properties

Sponges with covalently tethered amines for high-efficiency carbon capture

Enhanced Selective Co2 Adsorption On Polyamine/Mil-101(Cr) Composites

Covalent Organic Frameworks with Tunable Co–N–C for High-Performance Carbamate Decomposition Via Sulfonic Modification in Amine-based CO2 Capture

Molecule‐level Design to Form Pocket Structures for Improving Amine Efficiency in CO2 Capture

Amine-Grafted MIL-101(Cr) Via Double-Solvent Incorporation for Synergistic Enhancement of CO2 Uptake and Selectivity