Abstract:ConspectusCarbon dioxide (CO2) capture and storage (CCS) is a means to enable the continued use of fossil fuels in the short term. In particular, postcombustion CO2 capture has attracted considerable attention because it can be retrofitted into existing power plants and industrial plants. Among various CO2 capture technologies, the absorption of CO2 using aqueous amines has been industrially employed for decades. However, such amine scrubbing technologies have inherent limitations of environmental and health concerns due to volatile amine loss, corrosion, and high energy demands for regeneration. To overcome these limitations, CO2 adsorption using solid adsorbents has emerged as a promising alternative due to its noncorrosiveness and low energy demand. Various amine-containing adsorbents have been synthesized and investigated for postcombustion CO2 capture. These materials are prepared by physically impregnating low-vapor-pressure amine polymers or by chemically grafting amines onto nanoporous materials. A wide variety of amine guests and nanoporous hosts (e.g., SiO2, Al2O3, zeolites, MOFs, and polymers) have been combined to develop advanced CO2 adsorbents.The design of CO2 adsorbents is a multifaceted puzzle that must ultimately consider integration with large-scale CO2 capture processes. Various engineering aspects need to be carefully considered. Unfortunately, a significant proportion of previous studies has primarily focused on the use of novel materials for improving the CO2 adsorption capacity. In this Account, we describe key challenges and solutions to develop energy-efficient and stable amine-containing adsorbents for postcombustion CO2 capture via temperature swing adsorption (TSA). We found that a high CO2 working capacity, often overemphasized in the literature, does not necessarily guarantee a low energy demand for CO2 capture. Suppressing coadsorption of H2O during the CO2 adsorption in humid flue gas is also a significant factor. Amine-containing adsorbents can be degraded through various pathways, including hydrothermal degradation of nanoporous hosts and chemical degradation of amine guests via urea formation and oxidation. To inhibit such degradation pathways, it is extremely important to properly design the nanoporous structures of the hosts and the molecular structures of the amine guests. By combining macroporous silica hosts, poly(ethylenimine) (PEI) functionalized with various alkyl epoxides, and phosphate-based oxidative stabilizers, we could synthesize adsorbents exhibiting low energy demands for CO2 capture and unprecedentedly high thermochemical stability under TSA conditions. The macroporous silica host synthesized by assembling fumed silica particles via spray-drying exhibited high hydrothermal stability and enabled uniform distribution of bulky amine polymers within its pores. The functionalization of PEI with alkyl epoxides converted its primary amines into hindered secondary amines, leading to a significant reduction in energy demand for TSA cycles and a remarkable improvement in long-term stabilities. The oxidative stability of amines could be drastically improved by adding phosphate metal-binding reagents, which can poison ppm-level metal impurities that catalyze amine oxidation. The present discussions will provide important insights into designing practical adsorbents for CO2 capture from engineering perspectives.

Amine-tethered Adsorbents Based on Three-Dimensional Macroporous Silica for CO(2) Capture from Simulated Flue Gas and Air.

Preparation and Co2 Sorption/Desorption of N-(3-Aminopropyl) Aminoethyl Tributylphosphonium Amino Acid Salt Ionic Liquids Supported into Porous Silica Particles

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Improvement of Adsorbent Materials for CO 2 Capture by Amine Functionalized Mesoporous Silica with Worm-Hole Framework Structure

An Immobilized Amine with Improved Cyclic Performance Prepared from Carboxyl Modified Mesoporous Silica for CO2 Capture

Utilizing silica fume and synthetically produced mesoporous silicas for simulated flue gas CO2 adsorption

CO2 Adsorption by Polyamine-Based Protic Ionic Liquid-Functionalized Mesoporous Silica: Regenerability and Influence of Flue Gas Contaminants

CO2 Capture by the Amine-modified Mesoporous Materials

Synthesis of amine-modified mesoporous materials for CO2 capture by a one-pot template-free method

Facile Co-Precursor Sol-Gel Synthesis of a Novel Amine-Modified Silica Aerogel for High Efficiency Carbon Dioxide Capture.

CO2 capture from dilute sources using triamine functionalized MCF silica at ambient temperature

Efficient CO_2 Capturer Derived from As-synthesized Mesoporous Silica Modified with Amines

Amine functionalized mesocellular silica foam as highly efficient sorbents for CO2 capture

Design of Amine-Containing Nanoporous Materials for Postcombustion CO2 Capture from Engineering Perspectives

Amine-functionalized Mesoporous Silica Derived from Natural Phyllosilicate for Efficient CO2 Adsorption

Sponges with covalently tethered amines for high-efficiency carbon capture

High Efficiency Mixed Amine Adsorbents for Directly Capturing Carbon Dioxide from Air

Amine-grafted Mesoporous Copper Silicates As Recyclable Solid Amine Sorbents for Post-Combustion CO 2 Capture

High CO2 adsorption on amine-functionalized improved macro-/mesoporous multimodal pore silica

Facile Synthesis of Silica Nanosheets with Hierarchical Pore Structure and Their Amine-Functionalized Composite for Enhanced CO2 Capture

Easily-synthesized and low-cost amine-functionalized silica sol-coated structured adsorbents for CO2 capture