Abstract:With the dramatic increase in CO 2 emissions over the last few decades and the subsequent rise in global temperatures leading to climate change, substantial efforts have been directed towards the development of materials designed for the direct capture of CO 2 from the atmosphere, a process known as direct air capture (DAC). DAC stands out as one of the primary negative emission technologies (NETs) expected to play a pivotal role in achieving negative CO 2 emissions. However, most of the reported sorbent performances have been focused on ambient temperatures (around 25 °C) or higher, specifically under dry conditions, with very few exceptions. This limitation has posed a significant obstacle to the widespread deployment of DAC, as a substantial portion of the world experiences sub-ambient temperatures and non-zero humidity levels. In this study, we evaluate the in-situ cationic ring-opening polymerization of three different 2-oxazolines monomers initiated by CPTMS or IPTMS, which are chemically tethered to mesoporous silica foam and large-pore alumina-silica supports and their performance for CO 2 capture under various conditions. Among all combinations of supports, initiators, and monomers, the MSF-C-EtOX sorbent demonstrated exceptional utilization of the support, initiator, and monomer properties, resulting in superior CO 2 uptakes under various conditions. The optimum adsorption temperature at dry condition was found to be 40°C, achieving a CO 2 uptake of 1.72 mmol/g. Further testing under sub-ambient dry adsorption conditions at -20°C showed a CO 2 capacity of 0.80 mmol/g. The introduction of moisture significantly enhanced CO 2 uptakes, reaching 2.45 mmol/g at 20 °C. Under humid conditions, the sorbent exhibited robust performance at low temperatures, with CO 2 uptakes of 1.88 and 1.40 mmol/g at 0°C and -20°C, respectively. Importantly, the sorbent demonstrated stable cyclic capacity over 10 and 50 cycles under humid and dry conditions, respectively. The findings presented in this study suggest that supported in-situ polymerized amines are promising materials for DAC under ambient-temperature and low-temperature conditions. There are additional prospects for fine-tuning these materials to facilitate the large-scale implementation of DAC facilities in diverse environmental conditions.

Amine-Functionalized Meso-Macroporous Polymers for Efficient CO 2 Capture from Ambient Air

Unveiling the Porosity Effect of Superbase Ionic Liquid-Modified Carbon Sorbents in CO 2 Capture from Air

Direct air capture multiscale modelling: From capture material optimization to process simulations

Advances in solid adsorbent materials for direct air capture of CO2

Ambient and sub-ambient temperature direct air CO2 capture (DAC) by novel supported in-situ polymerized amines

Development of sorbent materials for direct air capture of CO2

Amine-functionalized macroporous resin for direct air capture with high CO2 capacity in real atmospheric conditions: Effects of moisture and oxygen

Engineering Porous Organic Polymers for Carbon Dioxide Capture

Quaternary functionalized mesoporous adsorbents for ultra-high kinetics of CO2 capture from air

The Carbon Challenge: Design, Synthesis, and Chemisorption Behavior of Solid Sorbents in Direct Air Capture of Carbon Dioxide

Direct Air Capture of CO2 Using Poly(ethyleneimine)-Functionalized Expanded Poly(tetrafluoroethylene)/Silica Composite Structured Sorbents

Evaluating the viability of ethylenediamine-functionalized Mg-MOF-74 in direct air capture: The challenges of stability and slow adsorption rate

From Lab to Fab: Development and Deployment of Direct Air Capture of CO2

Design of Amine-Functionalized Materials for Direct Air Capture Using Integrated High-Throughput Calculations and Machine Learning

A Comparative Study of Different Sorbents in the Context of Direct Air Capture (DAC): Evaluation of Key Performance Indicators and Comparisons

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Nanosilica polyamidoamine dendrimers for enhanced direct air CO2 capture

Scalable and Highly Porous Membrane Adsorbents for Direct Air Capture of CO 2

Harnessing the Hybridization of a Metal-Organic Framework and Superbase-Derived Ionic Liquid for High-Performance Direct Air Capture of CO2.

Amine-tethered Adsorbents Based on Three-Dimensional Macroporous Silica for CO(2) Capture from Simulated Flue Gas and Air.

Ultra-highly Efficient Adsorbent for CO2 Capture from Air by Directional Deprotonation Regulation of MOFs-based Amine Grafting