Abstract:ConspectusCarbon dioxide (CO2) capture and storage (CCS) is a means to enable the continued use of fossil fuels in the short term. In particular, postcombustion CO2 capture has attracted considerable attention because it can be retrofitted into existing power plants and industrial plants. Among various CO2 capture technologies, the absorption of CO2 using aqueous amines has been industrially employed for decades. However, such amine scrubbing technologies have inherent limitations of environmental and health concerns due to volatile amine loss, corrosion, and high energy demands for regeneration. To overcome these limitations, CO2 adsorption using solid adsorbents has emerged as a promising alternative due to its noncorrosiveness and low energy demand. Various amine-containing adsorbents have been synthesized and investigated for postcombustion CO2 capture. These materials are prepared by physically impregnating low-vapor-pressure amine polymers or by chemically grafting amines onto nanoporous materials. A wide variety of amine guests and nanoporous hosts (e.g., SiO2, Al2O3, zeolites, MOFs, and polymers) have been combined to develop advanced CO2 adsorbents.The design of CO2 adsorbents is a multifaceted puzzle that must ultimately consider integration with large-scale CO2 capture processes. Various engineering aspects need to be carefully considered. Unfortunately, a significant proportion of previous studies has primarily focused on the use of novel materials for improving the CO2 adsorption capacity. In this Account, we describe key challenges and solutions to develop energy-efficient and stable amine-containing adsorbents for postcombustion CO2 capture via temperature swing adsorption (TSA). We found that a high CO2 working capacity, often overemphasized in the literature, does not necessarily guarantee a low energy demand for CO2 capture. Suppressing coadsorption of H2O during the CO2 adsorption in humid flue gas is also a significant factor. Amine-containing adsorbents can be degraded through various pathways, including hydrothermal degradation of nanoporous hosts and chemical degradation of amine guests via urea formation and oxidation. To inhibit such degradation pathways, it is extremely important to properly design the nanoporous structures of the hosts and the molecular structures of the amine guests. By combining macroporous silica hosts, poly(ethylenimine) (PEI) functionalized with various alkyl epoxides, and phosphate-based oxidative stabilizers, we could synthesize adsorbents exhibiting low energy demands for CO2 capture and unprecedentedly high thermochemical stability under TSA conditions. The macroporous silica host synthesized by assembling fumed silica particles via spray-drying exhibited high hydrothermal stability and enabled uniform distribution of bulky amine polymers within its pores. The functionalization of PEI with alkyl epoxides converted its primary amines into hindered secondary amines, leading to a significant reduction in energy demand for TSA cycles and a remarkable improvement in long-term stabilities. The oxidative stability of amines could be drastically improved by adding phosphate metal-binding reagents, which can poison ppm-level metal impurities that catalyze amine oxidation. The present discussions will provide important insights into designing practical adsorbents for CO2 capture from engineering perspectives.

Efficient and stable CO2 capture using a scalable and spontaneous cross-linking amine-functionalized nano-Al2O3 adsorbent

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Easily-synthesized and low-cost amine-functionalized silica sol-coated structured adsorbents for CO2 capture

Atom-level interaction design between amines and support for achieving efficient and stable CO2 capture

Design of Amine-Containing Nanoporous Materials for Postcombustion CO2 Capture from Engineering Perspectives

High-Selective CO2 Capture in Amine-Decorated Al-MOFs

Facile and efficient amine@AD-SiO 2 adsorbents from coal fly ash: Comparison of various amines for CO 2 adsorption capacity and cyclic stability

Controllable Construction of Amino-Functionalized Dynamic Covalent Porous Polymers for High-Efficiency CO2 Capture from Flue Gas

Amine-tethered Adsorbents Based on Three-Dimensional Macroporous Silica for CO(2) Capture from Simulated Flue Gas and Air.

Effective CO 2 Catalytic Conversion by Nitrogen-Rich Covalent Organic Framework-Immobilized Ag Nanoparticles

Effective CO2 Catalytic Conversion by Nitrogen-Rich Covalent Organic Framework-Immobilized Ag Nanoparticles

A Soluble and Recyclable Polymeric Adsorbent of Intrinsic Microporosity for CO2 Capture

Sponges with covalently tethered amines for high-efficiency carbon capture

CO2 capture on aminosilane functionalized alumina-extracted residue of catalytic gasification coal ash

Synthesis of Porous Organic Polymers with Tunable Amine Loadings for CO2 Capture: Balanced Physisorption and Chemisorption

A scalable solid-state nanoporous network with atomic-level interaction design for carbon dioxide capture

Development of composite amine functionalized polyester microspheres for efficient CO2 capture

Facile fabrication of mesoporosity silica as support for solid amine CO2 adsorbents with enhanced adsorption capacity and kinetics

A comparative study on energy efficient CO2 capture using amine grafted solid sorbent: Materials characterization, isotherms, kinetics and thermodynamics

Efficient CO_2 Capturer Derived from As-synthesized Mesoporous Silica Modified with Amines