Abstract:Abstract In order to solve the problem that a traditional articulated arm coordinate measuring machine (AACMM) cannot measure automatically, a self-driven AACMM is proposed. Based on the self-driven AACMM design indicators, the length of the connecting rods of the self-driven AACMM was allocated. The self-driven AACMM virtual prototype was designed and assembled based on joint module selection and joint component design, and its measurement space range was also verified. The key components of the structural optimized design and dynamic performance analysis of motion parameters are adopted, respectively, to correct the positioning error of the self-driven AACMM’s probe caused by static and dynamic deformations. The static deformation of the structure caused by the self-driven AACMM’s weight was analyzed. The influence of the dynamic flexible deformation on the positioning error of the probe of the self-driven AACMM during the variable-speed approach and the constant-speed touch measurement stage was studied. The results show that the measurement space range of the self-driven AACMM designed in this paper can meet the design index of the measuring radius. The probe position error caused by static deformation of the measuring machine after structural optimization is reduced by an order of magnitude, and the equivalent stress of the mechanical structure of the self-driven AACMM is within the allowable stress of the material. The positioning error of the probe caused by the dynamic deformation of the self-driven AACMM structure meets the positioning accuracy index. During the stage of self-driven AACMM constant-speed touch measurement, the instantaneous position error of the probe changes linearly with the touch time and the optimal touch speed (6.6 mm s −1 , 6.4 mm s −1 ) exists to minimize the probe positioning error. During the variable-speed approach stage, the influence of the angular acceleration and the angular velocity of each joint on the positioning error of the probe is negligible when the self-driven AACMM is in the typical posture. In the extreme posture, with the optimal joint angular acceleration ( 0.00055 ∘ s − 2 ) and angular velocity ( 0.0185 ∘ s − 1 ), the inertial force of the measuring machine structure and the instantaneous position error of the probe are the smallest, and the movement stability is the best. The structural optimization design and motion parameter performance analyses of the self-driven AACMM can provide a theoretical research foundation for subsequent motion parameter optimization and dynamic error compensation modeling.

A non-destructive measurement method for axial force using torque in connecting bar with joint bearing ends

Geometrically Non-Linear Force Method for Assemblies with Infinitesimal Mechanisms

Axial stress measurement for tightened bolt based on the effect of stress on ultrasonic wave attenuation

Estimation of the ultrasonic time-of-flight for evaluating the axial force acting on bolt/nut assemblies under various mechanical and thermal conditions

A Novel Flexible Centralized Force Sensor Based on Tri‐Axis Force Refactoring Method for Arbitrary Force Components Measurement

Noncontact measurement of bolt axial force in tightening processes using scattered laser ultrasonic waves

Structural design and performance analysis of a self-driven articulated arm coordinate measuring machine

Ultrasonic Measurement Method of Bolt Axial Stress Based on Time Difference Compensation of Coupling Layer Thickness Change

Design and Analysis of a New Tool Holder with Force Sensing Element

Axial Load Measurement of Bolts with Different Clamping Lengths Based on High-Frequency Ultrasonic ZnO Film Sensor

A Novel Dynamometer for Monitoring Milling Process

Ultrasonic measurement of tie-bar stress for die-casting machine

Development of a Tri-Axial Cutting Force Sensor for the Milling Process.

High-Speed and High-Precision Online Measurement Technology for Engine Connecting Rod Weight and Barycenter

An Ultrasonic Technique for Axial Bolt-Stress Determination

Behavior of Axially Loaded Tubular X-Joints Using Bolted Connection: Mechanical Model and Validation

Connection force measurement of precision small interference components using ultrasound

A Machine Vision-Based Measurement Method for the Concentricity of Automotive Brake Piston Components

Measurement of fastening force using dry-coupled ultrasonic waves

Analytical Modeling of Axial Stiffness of Tensile Bolted Joints under Concentric External Load

Design and Characterization of a T-shaped Two-Axis Force Sensor