Abstract:The non-destructive stress measurement method is the main trend in residual stress analysis. The ultrasonic method, which utilizes the acoustoelastic effect of the longitudinal critically refracted (LCR) wave, is one of the time-saving measurement techniques. During the practical stress measurement on a workpiece, various external factors may impact the transmission of acoustic waves and the resulting stress value. This study revealed and discussed the effects of four factors on the LCR wave: surface roughness of the examined material, temperature of the material, external mechanical vibration, and surface paint. The stress coefficient was determined by comparing the offset time of the acoustic wave with the stress measured by X-ray analyzer in the zero-stress specimens, which had undergone annealing and deep cryogenic treatment. The test results indicated that the surface roughness did not affect the transition time of the acoustic wave, but it did decrease the intensity of the signal. The increase in temperature and the transition time of the acoustic wave were in a linear relationship. Mechanical vibrations from the environment would not affect the transition time or signal intensity of the acoustic wave, whereas the application of surface paint increased the transition time. Although the effect of paint on the actual workpiece could not be easily modified during stress measurement, the ultrasonic method was still suitable for monitoring the stress of a specific position of the workpiece throughout its operational lifetime. The experiment data in this study were applied to measuring the residual stress of an aluminum ship component, and the result showed a good correspondence with X-ray stress analyzer results.

Ultrasonic measurement of tie-bar stress for die-casting machine

Non-intrusive Ultrasonic Measurement of Tie-Bar Stress for Molding Equipment

Study on Measurement Method of Interior Stress Distributions in Engineering Rolled-Plates

Ultrasonic Measurement of Clamping Force for Injection Molding Machine

Electromagnetic Ultrasonic Measurement for Welding Residual Stress Detection - Comparison Between Experiment with Numerical Simulation

Noninvasive Stress Detection Based on Piezoelectric Micromachined Ultrasonic Transducers for Bolt Loosening Warning

Ultrasonic stress detection and regulation in the whole machining process of thin-walled part

Inline Measurement of Acoustoelastic Coefficient in Conductive Sheet Material With Electromagnetic Loading System

Effects of factors from practical workpieces on ultrasonic LCR method stress measurement

Research on Welding Residual Stress Measurement Using Electromagnetic Acoustic Transducer

Non-destructive evaluation of non-uniform stress fields and subsurface stress gradients using ultrasonic waves

Ultrasonic Measurement of Stress Considering Strain Effect

On-line measurement of cavity pressure during injection molding via ultrasonic investigation of tie bar

Ultrasonic measurement of contact stress at metal-to-metal interface based on a real rough profile through modeling and experiment

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

Application of Ultrasonic Stress Measurement in the Evaluation of Bolt Fastening Force

Three-dimensional stress measurement for structural steel plates using ultrasonic T-waves and P-waves

Research on the Method of Absolute Stress Measurement for Steel Structures via Laser Ultrasonic

Research on the Measurement Technology for Pretension Stress on Small-Sized Bolts Based on the Piezoelectric Ultrasonic Resonance Method

Ultrasonic Correction Measurement for Residual Stress in 5083 Aluminum Alloy Welded Component of High-Speed Train

Axial stress measurement for tightened bolt based on the effect of stress on ultrasonic wave attenuation