Abstract:<p>Due to its low cost and high efficiency, injection molding is used for the mass production of many plastic products nowadays. However, when processing low-viscosity plastic materials, i.e., materials with an excellent fluidity, an inappropriate setting of the clamping force often results in a poor appearance and dimensional accuracy of the final product. Thus, operators usually take the upper limit of the clamping force as a default in setting up the machine in an attempt to improve the quality of the molded parts. However, such an approach shortens the machine and mold life, increases the energy consumption, and leads to poor air venting. Consequently, more scientific methods for determining the clamping force setting are required. To meet this demand, the present study proposes a clamping force search methodology for determining the optimal clamping force setting of a hydraulic cylinder clamping injection molding machine in the processing of low-viscosity plastics such as thermoplastic polyurethane (TPU) and polypropylene (PP). Based on the characteristic extracted from the sensing tie-bar elongation profile under different clamping force settings, a regression analysis on these data points is implemented to seek for an optimal clamping force. The experimental results show that for an injection molding machine with a hydraulic cylinder clamping mechanism, the effect of the mold temperature on the clamping force is sufficiently small to be ignored, which has an impact on the toggle type clamping unit. Furthermore, compared to traditional methods, the optimal clamping force obtained using the method proposed in the present study results in a significant improvement in the yield rate. Overall, the results confirm that for low-viscosity polymer resins, the optimal clamping force determined using the proposed method results in a higher and more consistent quality of the molded parts than that achieved using the proper clamping force setting for ordinary-viscosity resins.</p>

Ultrasonic Measurement of Clamping Force for Injection Molding Machine

Clamping force prediction for automatic drilling of stacked thin-walled workpieces based on finite element method

On-line measurement of cavity pressure during injection molding via ultrasonic investigation of tie bar

Non-intrusive Ultrasonic Measurement of Tie-Bar Stress for Molding Equipment

Ultrasonic measurement of tie-bar stress for die-casting machine

A Nondestructive Online Method for Monitoring the Injection Molding Process by Collecting and Analyzing Machine Running Data

Clamping Technology Optimization of High Speed Machining of NOMEX Honeycomb Core Based on Milling Force Model

Novel concept of self-adaptive clamping for precision injection molding

In-situ Density Measurement for Plastic Injection Molding Via Ultrasonic Technology

Optimization of clamping force for low-viscosity polymer injection molding

Comparison and Analysis of All-Electric Precise Injection Molding Machines and Clamping Units

In-situ ultrasonic measurement of molten polymers during injection molding

Non-destructive measurement of cavity pressure during injection molding process based on ultrasonic technology and Gaussian process

Visualization and Monitoring of the Injection Molding Process Using Ultrasonic Phased Array

Nondestructive measurement for wall thickness of product molded by fluid-assisted co-injection molding using ultrasound

Nondestructive Measurement of Layer Thickness in Water‐assisted Coinjection‐molded Product by Ultrasonic Technology

Connection force measurement of precision small interference components using ultrasound

Thermo-Mechanical Coupling Analysis of the Actuating Mechanism in a High Speed Press

Design and fabrication of an adhesion force tester for the injection moulding process

Research on the key technologies for new large dual-platen high-precision clamping system

Clamping Properties Investigation in Micro/Nano Scale Experimental Mechanics