Abstract:<p>Due to its low cost and high efficiency, injection molding is used for the mass production of many plastic products nowadays. However, when processing low-viscosity plastic materials, i.e., materials with an excellent fluidity, an inappropriate setting of the clamping force often results in a poor appearance and dimensional accuracy of the final product. Thus, operators usually take the upper limit of the clamping force as a default in setting up the machine in an attempt to improve the quality of the molded parts. However, such an approach shortens the machine and mold life, increases the energy consumption, and leads to poor air venting. Consequently, more scientific methods for determining the clamping force setting are required. To meet this demand, the present study proposes a clamping force search methodology for determining the optimal clamping force setting of a hydraulic cylinder clamping injection molding machine in the processing of low-viscosity plastics such as thermoplastic polyurethane (TPU) and polypropylene (PP). Based on the characteristic extracted from the sensing tie-bar elongation profile under different clamping force settings, a regression analysis on these data points is implemented to seek for an optimal clamping force. The experimental results show that for an injection molding machine with a hydraulic cylinder clamping mechanism, the effect of the mold temperature on the clamping force is sufficiently small to be ignored, which has an impact on the toggle type clamping unit. Furthermore, compared to traditional methods, the optimal clamping force obtained using the method proposed in the present study results in a significant improvement in the yield rate. Overall, the results confirm that for low-viscosity polymer resins, the optimal clamping force determined using the proposed method results in a higher and more consistent quality of the molded parts than that achieved using the proper clamping force setting for ordinary-viscosity resins.</p>

Research on the key technologies for new large dual-platen high-precision clamping system

Novel concept of self-adaptive clamping for precision injection molding

Design and Speed Control for Closed-loop Electro-hydraulic Proportional Servo Injection Machine System

Comparison and Analysis of All-Electric Precise Injection Molding Machines and Clamping Units

New Challenges In Precision Positioner Development

Clamping Technology Optimization of High Speed Machining of NOMEX Honeycomb Core Based on Milling Force Model

A New Fuzzy Self-Tuning Method for Controlling Packing Pressure of a High-Accuracy Injection Molding Machine

Hydraulic Systems Control Based on the Characteristics of Major-Motion Mechanism for an Open-Die Forging Manipulator

Clamping characteristics study on different types of clamping unit

Study on Clamping Method for Paper Honeycomb Based on Magnetic Field and Friction Principle

ANALYSIS OF LOAD CHARACTERISTICS AND CONTROL OF WATER HYDRAULIC SYSTEM FOR WAIM

Study On Technology Strategies For Guarantee Machining Precision Of Large-Scale Integrated Aircraft Parts

Study on Elastic Dynamic Model for the Clamping Mechanism of High-Speed Precision Injection Molding Machine

The Design of Mold Clamping Mechanisms with Two Dead-Position Configurations

Investigation on the design of hydraulic high-speed punching press with a large press force and a long press stroke

Optimization of clamping force for low-viscosity polymer injection molding

Hydraulic System Design and Simulation of the Forging Manipulator

Solution of Rigid-flexible Coupling Problem in Digital Prototyping of Double Toggle Mold Closing Device

Structural scheme optimization design for the stationary platen of a precision plastic injection molding machine

Recent development of improved clinching process

Design of Servo Control System of Precision Injection for Electro-Hydraulic Hybrid Injection Machine