Abstract:To solve the problems of low-strength and unsatisfactory connection quality in the plastic clinching of heterogeneous lightweight materials for car bodies, Q235 steel sheets and 5052 aluminum alloy sheets were selected as research objects. An inclined wall die for plastic clinching was designed on the basis of the deformation and flow characteristics of sheets in the plastic clinching process. Elastic–plastic finite element numerical simulation and experimental research were conducted to analyze the plastic clinching process of the inclined wall die, and the failure mode and mechanism of the clinching joints in the shear and peel experiment were comprehensively studied. Results showed that the inclined wall die can effectively increase the interlock value of the joints and reduce the maximum joining force during the clinching process under the condition of ensuring the neck thickness of the joints. When the inclined wall angle α increased from 90° to 100°, the interlock value increased by 38.9%, and the maximum joining force decreased by 8.3%. The influence of the inclined wall structure on joint quality can be divided into the extrusion, radial inflow, and stability stages. The comparison between the clinching experiment and the finite element results showed that the results are in good agreement, proving that the finite element model of the plastic clinching of the inclined wall die exhibits a high degree of credibility and verifying the feasibility of the practical application of the inclined wall die. Finally, the major failure mode of the joints under shear and peel loads was separation failure.

Clamping characteristics study on different types of clamping unit

Clamping force prediction for automatic drilling of stacked thin-walled workpieces based on finite element method

Finite Element Simulation for Optimal Clamping Scheme of Thin-Walled Workpiece in Milling Process

Steel-aluminum Plastic Clinching of an Inclined Wall Die

Finite Element Model for Optimal Clamping Scheme of Frame Shape Workpiece Based on Residual Stress Distribution

Clamping Technology Optimization of High Speed Machining of NOMEX Honeycomb Core Based on Milling Force Model

Research on the key technologies for new large dual-platen high-precision clamping system

An Adaptive Posture Following and Keeping Fixture and Experiments

Finite Element Method Simulation for Residual Stress in Quenched Aluminum Alloy Thick-Plate and Its Effect on Machining Distortion

Study on Clamping Method for Paper Honeycomb Based on Magnetic Field and Friction Principle

Comparison and Analysis of All-Electric Precise Injection Molding Machines and Clamping Units

Clamping Properties Investigation in Micro/Nano Scale Experimental Mechanics

An adaptive clamp system for deformation control of aerospace thin-walled parts

Numerical Analysis on the Clamping Reliability of Fixture-Workpiece Facility Considering Partial Slip

Novel concept of self-adaptive clamping for precision injection molding

Study On Technology Strategies For Guarantee Machining Precision Of Large-Scale Integrated Aircraft Parts

Prediction of clamping deformation in vacuum fixture–workpiece system for low-rigidity thin-walled precision parts using finite element method

Investigation on the Factors Influencing the Thickness Distribution of Superplastic-Formed Components

Strength Analysis of Clamping in Micro/nano Scale Experiments

Recent development of improved clinching process

Finite Element Analysis of Clamping Mechanisms of Two-plate Injection Machines