Abstract:The traditional methods taking nodal displacements as primary unknown variables are only applicable to the determination of the static and kinematic determinacy of pin-bar assemblies. For other types of pin-jointed assemblies, such as reciprocal configurations, traditional methods are no longer valid for determining their static and kinematic determinacy. In order to tackle the problem, this paper proposes a new generic method by taking the rigid-body displacements of each element as primary unknown variables. On the basis of the 'dislocations' compatibility at the articulated points in the configurations, the compatibility equations are derived and then kinematic matrix is obtained. Meanwhile, the forces at the articulated points of the elements are also chosen as primary unknown variables, and then the equilibrium equations at the reference point in the elements are derived to give the associated equilibrium matrix. From matrix computations for the obtained kinematic matrix and equilibrium matrix, the static and kinematic determinacy of the configurations can be determined. Furthermore, the geometric nonlinearity of the articulated mechanisms is considered, and then the exact kinematic governing equations and higher-order displacement compatibility conditions are established. Finally, several numerical examples are employed to demonstrate the effectiveness of the proposed new generic method for determining the static and kinematic determinacy. The results from the proposed method are then examined by those from traditional methods and finite element analyses. From the results for numerical examples, the first order infinitesimal mechanisms occur in the planar reciprocal configurations assembled from regular triangles and the Archimedes tiling, while the curved reciprocal configurations with the same topologies have no redundant restraints and are thus geometrically stable.

Geometrically Non-Linear Force Method for Assemblies with Infinitesimal Mechanisms

Finite Particle Method for Kinematically Indeterminate Bar Assemblies

Pre- and post-buckling analysis of structures by geometrically Nonlinear Force Method

Modeling of Underconstrained Systems with the Force Method

Nonlinear Dynamic Collapse Analysis of Space Semi-Rigid Frames Using Finite Particle Method

Dynamics Analysis of Mechanisms with Elastic Bars and Three-Dimensional Clearance Revolute Joints

A generic approach for analysis of mechanical assembly

Assembly Variation Analysis of Compliant Mechanisms by Combining Direct Linearization Method and Lagrange’s Equations

A New Flexible Multibody Dynamics Analysis Methodology of Deployable Structures with Scissor-Like Elements

Buckling analysis of structures based on geometrically nonlinear force method by solving kinematic path (GNFM-KP)

Determination of Static and Kinematic Determinacy of Pin-Jointed Assemblies Using Rigid-Body Displacements As Primary Unknown Variables

Improved Method for Geometrically Nonlinear Analysis

A General Discretization-Based Approach for the Kinetostatic Analysis of Closed-Loop Rigid/Flexible Hybrid Mechanisms.

Compliant assembly analysis including initial deviations and geometric nonlinearity—Part I: Beam structure

Linear Resolve Method for Assembly Stablity Without Friction

Motion Analysis of Deployable Structures Based on the Rod Hinge Element by the Finite Particle Method

Direct Kinematic Method for Exactly Constructing Influence Lines of Forces of Statically Indeterminate Structures

A General Approach to the Large Deflection Problems of Spatial Flexible Rods Using Principal Axes Decomposition of Compliance Matrices

Worst-Case Rigidity Analysis and Optimization for Assemblies with Mechanical Joints

Analysis and Optimization of Assembly Variations for Non-Rigid Parts

Equilibrium Equations of Incremental Forces and Its Application in Assembly Variation Analysis of Compliant Structures