Abstract:A high-frequency, piezoelectric thin-film sensor was successfully deposited on a nickel-based superalloy bolt by radio frequency magnetron sputtering to develop a smart, nickel-based superalloy bolt. Ultrasonic response characterization, high accuracy, and repeatability of ultrasonic measurement of axial preload in nickel-based superalloy smart bolts are reported here and were fully demonstrated. The axial preload in the nickel-based superalloy smart bolt was directly measured by the bi-wave method (TOF ratio between transverse and longitudinal-mode waves) without using the traditional integration of a longitudinal and shear transducer. A model concerning the bolt before and after tensioning was established to demonstrate the propagation and displacement distribution of the ultrasonic waves inside a nickel-based superalloy smart bolt. The measured A-scan signal presented significantly favorable features including a mixture of transverse and longitudinal mode waves, a pure and broad frequency spectrum which peaked at 17.14 MHz, and high measurement accuracy below 3% for tension of 4 kN–20 kN. For the temporal ultrasonic signal, the measurement envelopes were narrower than for the counterpart of the simulation, justifying the 'filtration' advantage of the high-frequency sensor. Both the TOF change of the single longitudinal-mode wave and the TOF ratio between transverse- and longitudinal-mode waves increased linearly with preload force in the range of 0 kN to 20 kN. Compared with the commercial piezoelectric probe, the proposed probe, based on the combination of a high-frequency, piezoelectric thin-film sensor and a magnetically mounted transducer connector, exhibited high tolerance to temperatures as high as 320 °C and high repeatability free from some interference factors such as bolt detection position change and couplant layer thickness. The results indicate that this system is a promising axial preload measurement system for high-temperature fasteners and connectors, and the proposed sensor is a practical, high-frequency ultrasonic sensor for non-destructive testing.

An Ultrasonic Technique for Axial Bolt-Stress Determination

Ultrasonic instrument for measuring bolt stress

Application of Ultrasonic Stress Measurement in the Evaluation of Bolt Fastening Force

Axial stress measurement for tightened bolt based on the effect of stress on ultrasonic wave attenuation

Characteristic Evaluation on Bolt Stress by Ultrasonic Nondestructive Methods

Research Review of Principles and Methods for Ultrasonic Measurement of Axial Stress in Bolts

Bolt Axial Stress Detection and Prediction Based on the Nonlinear Ultrasonic Technique

Measurement of axial stress using mode-converted ultrasound

Noncontact measurement of bolt axial force in tightening processes using scattered laser ultrasonic waves

Ultrasonic testing of axial stress of high strength bolts for bridges

Measurement of bolt axial stress using a combination of trailing wave and shear wave ultrasound

Bolt axial stress measurement based on the Dual-mode electromagnetic acoustic transducer

Acoustoelastic Measurement of Bolt Axial Load with Hypothetical Velocity Ratio Method.

Measurement of axial stress in high-strength short bolts using ultrasonic attenuation

Estimation of the ultrasonic time-of-flight for evaluating the axial force acting on bolt/nut assemblies under various mechanical and thermal conditions

Research on the Measurement Technology for Pretension Stress on Small-Sized Bolts Based on the Piezoelectric Ultrasonic Resonance Method

A Novel Experimental Method for Bolt Stress Distribution During the Assembly Process

Ultrasonic Measurement of Axial Preload in High-Frequency Nickel-Based Superalloy Smart Bolt

Quantification of Bolt Tension by Surface Acoustic Waves: An Experimentally Verified Simulation Study

An investigation on bolt stress ultrasonic measurement based on acoustic time difference algorithm with adaptive hybrid extended Kalman filter

A refined energy ratio method based on ultrasonic echoes for measuring short bolt axial stress