Abstract:Structural Health Monitoring, Ahead of Print. The ultrasonic testing method is a prospective technique adopted for measuring the axial force acting on a bolt; the method is a nondestructive testing method employed for structural health monitoring. In ultrasonic testing, the ultrasonic time of flight (ToF) is obtained, and the axial force is computed using the mathematical relationship between the ultrasonic ToF and the axial force acting on the bolt. Therefore, it is essential to accurately compute the axial force from the ToF. However, existing theoretical equations do not reflect actual scenarios that bolt/nut assemblies may encounter under varying mechanical and thermal conditions. Therefore, the practical application of this method in engineering practices is limited. Establishing a mathematical relationship by considering mechanical and thermal deformation could serve as a fundamental solution for providing more accurate axial force measurement results in ultrasonic testing. In this study, we proposed calibration equations that could be applied to various types of bolts, which are primarily used in mechanical components. The calibration coefficients obtained from the experiments were substituted into the theoretical equations to improve the estimation accuracy of the ultrasonic ToF. Additionally, we compared the experimental results acquired using various types of bolts: M8, M10, M12, and M14, with the results obtained from the theoretical equations using the calibration coefficients. It was verified that it could make the axial force measurement of the bolt accurate as a calibration of the change of the ToF by the bolt deformation from the mechanically stressed region and the thermal conditions with 8.8% error. We expect that the theoretically and experimentally verified calibration equations can improve the reliability and robustness of mechanical components.

Acoustoelastic Measurement of Bolt Axial Load with Hypothetical Velocity Ratio Method.

Axial stress measurement for tightened bolt based on the effect of stress on ultrasonic wave attenuation

Measurement of axial stress using mode-converted ultrasound

Application of Ultrasonic Stress Measurement in the Evaluation of Bolt Fastening Force

An Ultrasonic Technique for Axial Bolt-Stress Determination

Measurement of axial stress in high-strength short bolts using ultrasonic attenuation

Noncontact measurement of bolt axial force in tightening processes using scattered laser ultrasonic waves

Characteristic Evaluation on Bolt Stress by Ultrasonic Nondestructive Methods

Estimation of the ultrasonic time-of-flight for evaluating the axial force acting on bolt/nut assemblies under various mechanical and thermal conditions

Bolt axial stress measurement based on the Dual-mode electromagnetic acoustic transducer

Measurement of bolt axial stress using a combination of trailing wave and shear wave ultrasound

Ultrasonic testing of axial stress of high strength bolts for bridges

Measurement Method of Bolt Hole Assembly Stress Based on the Combination of Ultrasonic Longitudinal and Transverse Waves

Axial Load Measurement of Bolts with Different Clamping Lengths Based on High-Frequency Ultrasonic ZnO Film Sensor

Ultrasonic Measurement Method of Bolt Axial Stress Based on Time Difference Compensation of Coupling Layer Thickness Change

Research Review of Principles and Methods for Ultrasonic Measurement of Axial Stress in Bolts

Bolt Axial Stress Detection and Prediction Based on the Nonlinear Ultrasonic Technique

A refined energy ratio method based on ultrasonic echoes for measuring short bolt axial stress

Quantification of Bolt Tension by Surface Acoustic Waves: An Experimentally Verified Simulation Study

Research on the Measurement Technology for Pretension Stress on Small-Sized Bolts Based on the Piezoelectric Ultrasonic Resonance Method

Ultrasonic instrument for measuring bolt stress