Abstract:Acidic gases such as H 2 S and CO 2 are generated in the refineries during coal gasification. These pollutant gases need to be treated before releasing to the atmosphere. Conventionally, H 2 S gas is treated by Claus process in which H 2 S is converted to elemental S and H 2 O, in presence of O 2 at ∼1,200 K. In the present energy scenarios, hydrogen has got importance as a source of clean fuel for industrial application. The H 2 S generated in the refineries can be a potential precursor of hydrogen. If this hydrogen can be obtained by thermal decomposition of H 2 S, that can increase the overall economic value of the H 2 S containing streams and the produced hydrogen can be used for hydrocracking and hydro-treating in refineries, as well as to synthesize value-added products for chemical industries. However, H 2 S thermal decomposition is an endothermic and equilibrium limited reaction (equilibrium conversion is only ∼15 % at 1,000 K), requiring a very high temperature (∼1,500 K) to achieve even a conversion of greater than 40 %. Packed Bed Catalytic Membrane Reactor (PBCMR) for thermal decomposition of H 2 S can be a potential technology augmentation and process intensification to increase this equilibrium conversion. In this work, modeling and experimental studies of H 2 S thermal decomposition using in-house designed & developed PBCMR have been carried out. The modeling studies were validated with experimental data. Clay-alumina ceramic tubular membrane (L: 250 mm; OD: 12 mm; thickness: 2 mm) was fabricated using extrusion process having an average membrane pore size of ∼1 μm and with a porosity of ∼20 %. Pt (2 %) coated alumina extrudes were used as catalyst to accelerate the reaction kinetics. Experimental studies showed that H 2 S to hydrogen conversion of ∼90 % is achieved using PBCMR at ∼1,523 K, compared to only ∼40 % conversion in a conventional packed bed tubular reactor (without membrane). Modelling studies were carried out to study the influence of operating parameters such as, reactor wall temperature, feed temperature, pressure and feed velocity. Studies showed that reactor wall temperature is having the most dominant effect on H 2 S conversion, which is confirmed by experimental findings. The studies offer useful insights into the application of PBCMR technology for management of waste gas stream containing H 2 S and recovery of hydrogen.

Optimization of effecting parameters for flue gas desulfurization in a self‐priming venturi scrubber using response surface methodology

Reconfiguration of Acid Gas Removal Process Matching the Integration of Coal Chemical Industry with Green Hydrogen

A Semi-Wet Technological Process for Flue Gas Desulfurization by Corona Discharges at an Industrial Scale

Hydrogen Sulfide Removal Process Embedded Optimization of Hydrogen Network

CFD simulation of chemical reaction between sulfur dioxide and water in a venturi scrubber

Efficient control system for low-concentration inorganic gases from a process vent stream: application of surfactants in spray and packed columns

Experimental study on removal of hydrogen sulfide gas by spray and bubble blowing: A comparative study

Parametric investigation and RSM optimization of DBD plasma methods (direct & indirect) for H2S conversion in the air

Modeling & experimental studies on enhancement of H 2 S conversion using catalytic membrane reactor for hydrogen production

Efficiency And Optimal Operating Conditions Of Improved Bio-Trickling Reactor For Hydrogen Sulfide Removal

Progress on hydrogen sulfide removal: From catalytic oxidation to plasma-assisted treatment

Numerical analysis of SO 2 removal characteristics in industrial flue gas desulfurization reactor by spray drying adsorption

H2S Removal from Biogas using Steel Wool (Fe2O3) Adsorption Combined with Water Absorption: Experimental and Modelling via RSM

Mathematical modelling of a semi-dry SO 2 scrubber based on a Lagrangian-Eulerian approach

Research of Fixed Bed Reactor for Adsorptive Desulfurization by Activated Carbon

Mechanism of SO3/H2SO4 transformation and reduction in wet flue gas desulfurization systems

Mass Transfer and Reaction Process of the Wet Desulfurization Reactor with Falling Film by Cross-Flow Scrubbing

Semi-dry flue gas desulphurization in spray towers: a critical review of applicable models for computational fluid dynamics analysis

Exploring the multiphase flow and mass transfer characteristics for desulfurization in an upflow biogas reactor

Rate-based model for predicting and evaluating H2S absorption in the haloalkaliphilic biological desulfurization process

The comprehensive evaluation of available pilot-scale H2S abatement process in a coke-oven gas: Efficiency, economic, energy, and environmental safety (4ES)