Abstract:In this study, we investigate the mechanical behavior of large concrete structures affected by the alkali-silica reaction. Particularly, concrete dams are explored. Their permanent contact with water, and thus increased humidity, promotes the ASR. Seasonal variation of the environmental temperature causes different levels of concrete damage in “cold” and “warm” zones. In order to study the behavior of such structures, a thermo-mechanical multi-scale numerical model is developed. It is based on the algorithm proposed by Cuba Ramos [1]. Simulations are performed at the macroand meso-scales, both of which are handled by the finite element method. An elastic thermo-mechanical simulation, performed at the macro-scale, results in a temperature and displacement field. This information at every integration point of the macro-scale is communicated to a corresponding representative volume element (RVE) at the meso-scale. The temperature value is used to determine the gel expansion rate for the following time step. Advancement of the ASR at the level of RVEs leads to gel expansion, deformation of the matrix, and growth of cracks. Given the solution of an RVE problem, homogenized material properties are extracted and communicated to the corresponding integration point of the macro-structure. In the next loading step, the latter behaves according to local states of material throughout a structure. Concrete damaging process is locally driven by gel volume increase, which in its turn depends on the rate of alkali-silica reaction. An equation used to relate the ambient temperature and the amount of available reactants to the gel strain rate is inspired by the Arrhenius law. Parameters of this equation are calibrated based on the experiments by Gautam & Panesar [2]. Cracks in concrete are handled by a continuum damage model. Convergence of the static solution in the presence of multiple cracks is achieved by modification of the sequential linear analysis proposed by Rots and Invernizzi [3]. The cement paste at the meso-scale behaves viscoelastically, which causes relaxation of stresses and reduction in the level of damage. For this purpose, an algorithm coupling the SLA with the general viscoelastic model is developed. REFERENCES [1] Ramos A. I. C., Roux-Langlois C., Dunant C. F., Corrado M., Molinari J.-F. 2018. HPC simulations of alkali-silica reaction-induced damage: Influence of alkali-silica gel properties. Cement and Concrete Research, 109:90 – 102. [2] B. P. Gautam and D. K. Panesar. 2016. A new method of applying long-term multiaxial stresses in concrete specimens undergoing ASR, and their triaxial expansions. Materials and Structures, 49(9):34953508. [3] J. Rots and S. Invernizzi. 2004. Regularized sequentially linear saw-tooth softening model. International Journal for Numerical and Analytical Methods in Geomechanics, 28(7-8):821–856.

Influence of the expansive sites distribution on alkali-silica reaction expansion under applied stress: Crack orientation as a key factor for expansion transfer

Influence of creep and stress states on alkali-silica reaction induced-expansion of concrete under restraint

Predicting damage in aggregates due to the volume increase of the alkali-silica reaction products

Expansive cracking and compressive failure simulations of ASR and DEF damaged concrete using a mesoscale discrete model

Numerical Calculation of Expansion Induced by Alkali Silica Reaction

Modelling the mechanical behaviour of concrete subjected to Alkali-Silica Reaction (ASR) under multi-axial stress

Modelling the structural behaviour of a dam affected by alkali–silica reaction

Experimental and numerical study of long-term alkali-silica reaction (ASR) expansion in mortar with recycled glass

A Review of Numerical Models for the Performance Assessment of Concrete Structures Affected by Alkali-Silica Reaction

Model for alkali-silica reaction expansions in concrete using zero-thickness chemo-mechanical interface elements

Concrete Expansion Induced by Alkali–Silica Reaction in a Small Arch Dam

Alkali-silica reaction expansion model for confined concrete with stress-dependency and casting direction anisotropy

Effects of temperature on expansion of concrete due to the alkali-silica reaction: A simplified numerical approach

Study on the internal crack network of the ASR-affected concrete by the tomography-based numerical model

Calculation of alkali silica reaction (ASR) induced expansion before cracking of concrete

Time-dependent Effect of Expansion due to Alkali-silica Reaction on Mechanical properties of Concrete

Analytical Study on the Load-Bearing Performance of RC Beams Subjected to ASR Expansion

Meso-scale finite element modeling of Alkali-Silica-Reaction

Simulation of concrete structures deformation affected by alkali–silica reaction considering environmental conditions and multiaxial stress state

THE DEVELOPMENT OF MESOSCOPIC STRUCTURAL ANALYSIS FOR MECHANICAL PROPERTY REDUCTION OF CONCRETE DAMAGED BY EXPANSION CRACKING DUE TO ASR

Experiments-based multi-scale modeling of the alkali-silica reaction in concrete