Abstract:In this study, we investigate the mechanical behavior of large concrete structures affected by the alkali-silica reaction. Particularly, concrete dams are explored. Their permanent contact with water, and thus increased humidity, promotes the ASR. Seasonal variation of the environmental temperature causes different levels of concrete damage in “cold” and “warm” zones. In order to study the behavior of such structures, a thermo-mechanical multi-scale numerical model is developed. It is based on the algorithm proposed by Cuba Ramos [1]. Simulations are performed at the macroand meso-scales, both of which are handled by the finite element method. An elastic thermo-mechanical simulation, performed at the macro-scale, results in a temperature and displacement field. This information at every integration point of the macro-scale is communicated to a corresponding representative volume element (RVE) at the meso-scale. The temperature value is used to determine the gel expansion rate for the following time step. Advancement of the ASR at the level of RVEs leads to gel expansion, deformation of the matrix, and growth of cracks. Given the solution of an RVE problem, homogenized material properties are extracted and communicated to the corresponding integration point of the macro-structure. In the next loading step, the latter behaves according to local states of material throughout a structure. Concrete damaging process is locally driven by gel volume increase, which in its turn depends on the rate of alkali-silica reaction. An equation used to relate the ambient temperature and the amount of available reactants to the gel strain rate is inspired by the Arrhenius law. Parameters of this equation are calibrated based on the experiments by Gautam & Panesar [2]. Cracks in concrete are handled by a continuum damage model. Convergence of the static solution in the presence of multiple cracks is achieved by modification of the sequential linear analysis proposed by Rots and Invernizzi [3]. The cement paste at the meso-scale behaves viscoelastically, which causes relaxation of stresses and reduction in the level of damage. For this purpose, an algorithm coupling the SLA with the general viscoelastic model is developed. REFERENCES [1] Ramos A. I. C., Roux-Langlois C., Dunant C. F., Corrado M., Molinari J.-F. 2018. HPC simulations of alkali-silica reaction-induced damage: Influence of alkali-silica gel properties. Cement and Concrete Research, 109:90 – 102. [2] B. P. Gautam and D. K. Panesar. 2016. A new method of applying long-term multiaxial stresses in concrete specimens undergoing ASR, and their triaxial expansions. Materials and Structures, 49(9):34953508. [3] J. Rots and S. Invernizzi. 2004. Regularized sequentially linear saw-tooth softening model. International Journal for Numerical and Analytical Methods in Geomechanics, 28(7-8):821–856.

Expansive cracking and compressive failure simulations of ASR and DEF damaged concrete using a mesoscale discrete model

A mesoscale discrete model for mechanical performance of concrete damaged by coupled ASR and DEF

Mesoscopic simulation of crack propagation and bond behavior in ASR damaged concrete with internal/external restraint by 3D RBSM

Effect of Aggregate on Cracking Behaviours of Concrete in Mesoscopic Modeling

Investigating the flexural behavior of ASR‐damaged RC beam through internal stress and cracking development using 3D Rigid Body Spring Model

Analytical Study on the Load-Bearing Performance of RC Beams Subjected to ASR Expansion

A Review of Numerical Models for the Performance Assessment of Concrete Structures Affected by Alkali-Silica Reaction

New concrete cracking model established based on fracture mechanics and damage theory

THE DEVELOPMENT OF MESOSCOPIC STRUCTURAL ANALYSIS FOR MECHANICAL PROPERTY REDUCTION OF CONCRETE DAMAGED BY EXPANSION CRACKING DUE TO ASR

3 D In-situ XCT Image Based Mesoscale Fracture Modelling and Validation of Concrete Using Voxel Hexahedron Meshing and Damage Plasticity Model

Simulation of concrete structures deformation affected by alkali–silica reaction considering environmental conditions and multiaxial stress state

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Experimental study on flexural behaviour of DEF–ASR-affected prestressed concrete beams

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

Modelling the mechanical behaviour of concrete subjected to Alkali-Silica Reaction (ASR) under multi-axial stress

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

Two‐dimensional Rigid Body Spring Method Based Micro‐mesoscale Study of Mechanical Strengthening/damaging Effects to Concrete by Frost Action

3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray Computed Tomography images using damage plasticity model

Experiments-based multi-scale modeling of the alkali-silica reaction in concrete

3-D Numerical Modelling of Mesoscopic Configuration and Cracking of Concrete