Abstract:This paper reviews numerical studies on the effect of expansion and damage due to alkali-silica reaction (ASR) on the mechanical performance of concrete and reinforced concrete at the structural scale level. Previous research on model development that has focused on the performance of RC members or structures is collected and summarized based on how they operationalize expansion progress. The models can be divided into three categories: models that receive the target expansion amount as an input value, models that use expansion curves, and models that calculate the increase in free expansion by considering the kinetic process of ASR. The aim of the model development can be related to either the deformation of the member or the load capacity for static or dynamic load actions. Expansion transfer under confined conditions is characteristic of the ASR problem, and the methods to model expansion transfer are accordingly summarized. Various considerations concerning the effect of ASR expansion and associated damage on the concrete constitutive laws are also studied. Expansion transfer under multi-axial stress states can be accurately reproduced by the modeling of expansion redistribution and volumetric expansion reduction under stress conditions. There are diverse methods to model the resultant deterioration of mechanical properties, but the primary method is by reducing the strength and elastic modulus according to empirically determined relationships. The ideal modeling approach is still under discussion because the effect of the anisotropic cracking state on the anisotropic mechanical response still requires further study. Finally, current problems of assessment of ASR-damaged concrete structures were discussed, and the significance of the causal correlation between macroscopic expansion behavior and microscale factors was suggested.

THE DEVELOPMENT OF MESOSCOPIC STRUCTURAL ANALYSIS FOR MECHANICAL PROPERTY REDUCTION OF CONCRETE DAMAGED BY EXPANSION CRACKING DUE TO ASR

Analytical Study on the Load-Bearing Performance of RC Beams Subjected to ASR Expansion

Expansive cracking and compressive failure simulations of ASR and DEF damaged concrete using a mesoscale discrete model

A mesoscale discrete model for mechanical performance of concrete damaged by coupled ASR and DEF

A Review of Numerical Models for the Performance Assessment of Concrete Structures Affected by Alkali-Silica Reaction

Mesoscopic simulation of crack propagation and bond behavior in ASR damaged concrete with internal/external restraint by 3D RBSM

Study on the internal crack network of the ASR-affected concrete by the tomography-based numerical model

Time-dependent Effect of Expansion due to Alkali-silica Reaction on Mechanical properties of Concrete

New concrete cracking model established based on fracture mechanics and damage theory

Multi-Scale Analysis Of Damage Process For Concrete Structures

Damage Analysis and Cracking Model of Reinforced Concrete Structures with Rebar Corrosion

Simulation and Experimental Verification of the Non-Uniform Corrosion Cracking Process of Reinforced Mortar Specimen

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

Modelling the mechanical behaviour of concrete subjected to Alkali-Silica Reaction (ASR) under multi-axial stress

Finite Element Modelling of ASR Affected Reinforced Concrete Beams Based on Realistic Pre‐damage

Meso‐scale Particle Modeling of Concrete Deterioration Caused by Alkali‐aggregate Reaction

Mesoscale Modeling Study on Mechanical Deterioration of Alkali–Aggregate Reaction-Affected Concrete

Experimental investigation of ASR-affected concrete – The influence of uniaxial loading on the evolution of mechanical properties, expansion and damage indices

Development of Expansive Agent Model in a Multi-scale Thermodynamic Framework Based on Hydration and Microstructure Formation

Simulation of concrete structures deformation affected by alkali–silica reaction considering environmental conditions and multiaxial stress state