Abstract:A heuristic "polymer‐patched inorganic" cathode coating strategy applied in sulfide‐based all‐solid‐state batteries is proposed to mitigate interfacial parasitic reactions while simultaneously assuring indispensable electronic percolation. The novel hybrid coating can be prepared by a scalable and convenient solution‐based method, and allows all‐solid‐state lithium batteries to achieve longevity and good power. Engineered cathode active materials are critical for the cycling stability and power capability of sulfide‐based all‐solid‐state lithium batteries (ASSBs), yet it is challenging to construct uniform coverage via a scalable approach. In addition, the implication of dielectric coatings for electronic migration blocking in the composite cathode is neglected habitually. A heuristic "polymer‐patched inorganic" cathode coating strategy is presented herein. Single‐crystalline LiNi0.6Co0.2Mn0.2O2 (SNCM) particles are uniformly coated with a hybrid layer comprising nanoscale Li1.4Al0.4Ti1.6(PO4)3 (LATP) and cyclized polyacrylonitrile (cPAN), via a scalable solution‐based method. The LATP coating ensures rapid Li+ transfer across the interface and offers high oxidation tolerance. cPAN partially‐submerges and patches the imperfections of the LATP coating layer, producing a high‐quality protective coating without compromising electronic transfer. Accordingly, sulfide‐based ASSBs employing the hybrid‐modified SNCM cathode demonstrate competitive electrochemical performance in terms of capacity retention (72.7% over 500 cycles, at 0.5 C), and rate capability (87.3 mAh g−1 at 2 C, 5 times that of the pristine SNCM). Significant improvements are attributed to the homogeneity and functionality of the coating, which mitigates parasitic reactions at the interface while simultaneously preserving indispensable electronic percolation. This work offers a brand‐new cathode coating protocol for sulfide‐based all‐solid‐state to achieve longevity and good power.

Application of Artificial Interphase on Ni-Rich Cathode Materials Via Hybrid Ceramic-Polymer Electrolyte in All Solid State Batteries

Chemo-mechanical stable cathode interphase via interface in-situ catalytic-conversion integrated design for all solid-state batteries

Stabilizing and understanding the interface between nickel-rich cathode and PEO-based electrolyte by lithium niobium oxide coating for high-performance all-solid-state batteries

A strategy involving the use of 3D self-supporting B.N co-doped carbon nanofiber composite solid polymer electrolytes to stabilize the interface of Polymer electrolyte and lithium-metal

Stabilizing Effect of a Hybrid Surface Coating on a Ni-Rich NCM Cathode Material in All-Solid-State Batteries

Surface Construction of a High-Ionic-Conductivity Buffering Layer on a LiNi<sub>0.6</sub>Co<sub>0.2</sub>Mn<sub>0.2</sub>O<sub>2</sub> Cathode for Stable All-Solid-State Sulfide-Based Batteries

Slurry-Coated LiNi0.8Co0.1Mn0.1O2-Li3InCl6 Composite Cathode with Enhanced Interfacial Stability for Sulfide-Based All-Solid-State Batteries.

Heuristic Design of Cathode Hybrid Coating for Power‐Limited Sulfide‐Based All‐Solid‐State Lithium Batteries

In-situ coating and surface partial protonation co-promoting performance of single-crystal nickel-rich cathode in all-solid-state batteries

Surface Construction of a High-Ionic-Conductivity Buffering Layer on a LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode for Stable All-Solid-State Sulfide-Based Batteries

Rechargeable Lithium Metal Batteries with an In‐Built Solid‐State Polymer Electrolyte and a High Voltage/Loading Ni‐Rich Layered Cathode

High-Performance Sulfide All-Solid-State Batteries Enabled by High-Voltage Ni-Rich Cathode with a Conformal and Conductive Protective Layer

High‐Performance All‐Solid‐State Batteries Enabled by Intimate Interfacial Contact Between the Cathode and Sulfide‐Based Solid Electrolytes

In Situ Construction of Li3N-enriched Interface Enabling Ultra-Stable Solid-State LiNi0.8Co0.1Mn0.1O2/lithium Metal Batteries

Manipulating interfacial stability of LiNi0.5Co0.3Mn0.2O2 cathode with sulfide electrolyte by nanosized LLTO coating to achieve high-performance all-solid-state lithium batterie

Interphase Stabilization of LiNi0.5 Mn1.5 O4 Cathode for 5 V-Class All-Solid-State Batteries

Surface Construction of a High-Ionic-Conductivity Buffering Layer on a LiNi0.6Co0.2Mn0.2O2 Cathode for Stable All-Solid-State Sulfide-Based Batteries

Stabilized Cathode/Sulfide Electrolyte Interface through Conformally Interfacial Nanocoating for All-Solid-State Batteries

Constructing Interfacial Nanolayer Stabilizes 4.3 V High‐Voltage All‐Solid‐State Lithium Batteries with PEO‐Based Solid‐State Electrolyte

Durable and Adjustable Interfacial Engineering of Polymeric Electrolytes for Both Stable Ni-Rich Cathodes and High-Energy Metal Anodes

Dendrite-Free Li5.5PS4.5Cl1.5-Based All-Solid-State Lithium Battery Enabled by Grain Boundary Electronic Insulation Strategy through In Situ Polymer Encapsulation