Abstract:Modulating the fracture toughness can be used to tailor or enhance the mechanical performances in the design of specific additively-manufactured engineering structures. In this research, we explored the fracture behavior of ULTEM 9085 materials fabricated by material extrusion (MEX) 3D printing technique, with a particular emphasis on the effect of weak interfaces between deposited beads. Under quasi-static bending condition, the MEX-fabricated ULTEM 9085 exhibits brittle and quasi-brittle fracture behaviors by adjusting the print orientations and raster angles. Several intrinsic toughening mechanisms are identified, including crack deflection and twisting, fibril bridging, constrained microcracking and delamination of the weak interface. Notably, the samples that experienced delamination along the weak interface displayed the highest performance in terms of the fracture toughness. To achieve high fracture toughness, we employed an analytical model based on linear elastic multilayers fracture mechanics to understand the crack onset and predict the crack propagate orientation. Based on the insight gained from this model, we proposed an intuitive optimal strategy to enhance the fracture resistance by fine turning the bonding strength and layer height to trigger the crack deflecting towards and propagating at the weak interface consistently. By implanting this approach, we achieved an increase of over 35% in fracture resistance while effectively preventing the catastrophic failure, demonstrating exceptional fracture-resistant performance. Overall, our study elucidates the impact of layer-by-layer MEX-induced weak interfaces on the fracture resistance of MEX-fabricated high temperature engineering materials. The findings of this research hold potential for engineering applications, particularly in optimizing the design of additive manufactured products aiming at high fracture resistant.

Linking flexural strength and strength‐limiting flaws in additively manufactured alumina with print parameter variations

Interlaboratory study of flexural strength in additively manufactured alumina

Flexural properties and finite element analysis of novel 3D‐printed ceramic materials via 3D‐LCM technology

Investigation of the Effect of Artificial Internal Defects on the Tensile Behavior of Laser Powder Bed Fusion 17–4 Stainless Steel Samples: Simultaneous Tensile Testing and X-Ray Computed Tomography

Fabrication of alumina ceramics with high flexural strength using stereolithography

Effect of particle size distribution and printing parameters on alumina ceramics prepared by Additive Manufacturing

Linking Rheology and Printability for Dense and Strong Ceramics by Direct Ink Writing

Optimizing 3D Laser Foil Printing Parameters for AA 6061: Numerical and Experimental Analysis

Deformation Mechanism of Aluminum, Copper, and Gold in Nanoimprint Lithography Using Molecular Dynamics Simulation

Survey of Microstructures and Dimensional Accuracy of Various Microlattice Designs Using Additively Manufactured 718 Superalloy

Additive manufacturing of ULTEM 9085: Weak interface-enriched multi-toughening mechanisms and fracture resistance optimization

Lack of Fusion in Additive Manufacturing: Defect or Asset?

In Situ X-ray Micro-Computed Tomography Study of the Damage Evolution of Prefabricated Through-Holes in SLM-Printed AlSi10Mg Alloy under Tension

Design approaches for printability-performance synergy in Al alloys for laser-powder bed additive manufacturing

Microstructure and mechanical properties of 3D printed porous Al2O3–ZrO2 laminated ceramics with tailored porosity

Fracture behavior of lithia disilicate- and leucite-based ceramics

Incorporating the Roles of Feature Size and Build Orientation in the Process-Structure-Property Relationship for Additively Manufactured Parts

Microstructure refinement-homogenization and flexural strength improvement of Al2O3 ceramics fabricated by DLP-stereolithography integrated with chemical precipitation coating process

Multiscale Finite Element Modeling of Alumina Ceramics Undergoing Laser-Assisted Machining

Additive manufacturing of metal-polymer hybrid parts: the influence of as-printed LPBF surface roughness on the joint strength

Strengthening Effect of Short Carbon Fiber Content and Length on Mechanical Properties of Extrusion-Based Printed Alumina Ceramics