Abstract:The Switched Reluctance Motor (SRM) drive is controlled by Direct Torque Control (DTC) with 16 partitions, active small and large VVs, and a multilevel hysteresis torque band (MHTB) strategy to mitigate torque ripple. The active VVs (i.e., 16) are employed in modified sector‐based switching tables to suppress torque ripples. The detailed results discuss the responses of torque, flux, and speed of the SRM. The experimental results of the DTC‐operated SRM drive demonstrate the effective minimization of torque ripples in the proposed DTC compared to the existing DTC. Summary The switched reluctance motor (SRM) is a prominent electrical machine drive with low cost and good performance in different drive applications. This machine's main drawbacks are torque ripple and flux ripple. However, the existing SRM‐operated direct torque control (DTC) Voltage vectors (VVs) give high torque ripples due to improper sector division and minimum selection of VVs switching states. On the other hand, a two‐level hysteresis torque band can result in torque ripples. Therefore, this paper proposed DTC using 16 partitions, active small and large VVs, and a multilevel hysteresis torque band (MHTB) strategy to mitigate the torque ripple further. More active VVs (i.e., 16) are employed in the modified sector‐based switching tables, suppressing the torque ripples. The proposed strategy is verified and validated using MATLAB/Simulink. The detailed result discusses the response of torque, flux, and speed of SRM. The DTC‐operated SRM drive experimental results prove the effective minimization of torque ripples in the proposed DTC compared to the existing DTC.

A Novel Sliding Hysteresis Band Based Direct Torque Control Scheme for PMSM Motors to Achieve Improved Current THD With Reduction in Torque and Flux Ripples Eliminating the Low-Speed Problems

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

Optimized Direct Instantaneous Torque Control for SRMs With Efficiency Improvement

Investigation Of Direct Torque Control And Torque Sharing Function Strategy For Switched Reluctance Motor Applications

A Novel Duty-Controlled DTC of a Surface PMSM Drive With Reduced Torque and Flux Ripples

The PMSM DTC Based on Variable Structure Sliding Mode

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

A Novel Switching-Table-Based Direct Torque Control with Improved Current and Torque Steady-State Performance for Dual Three-Phase PMSM

Torque-Performance Improvement for Direct Torque-Controlled PMSM Drives Based on Duty-Ratio Regulation

Torque Ripple Reduction of the Torque Predictive Control Scheme for Permanent-Magnet Synchronous Motors

Adaptive Torque Ripple Suppression Methods of Three-Phase PMSM During Single-Phase Open-Circuit Fault-Tolerant Operation

Five-Level Hysteresis DTC of Open-End Winding Permanent Magnet Synchronous Motors With Zero-Sequence Currents Suppression and Torque Ripple Reduction.

A Novel Direct Torque Control Method with the Compensation of Rotating EMF to Reduce Torque Ripple for Permanent Magnet Synchronous Motor Drives

Fuzzy Logic Direct Torque Control for Permanent Magnet Synchronous Motors

Low-Speed Performance Improvement of Direct Torque Control for Induction Motor Drives Fed by Three-Level NPC Inverter

An Improved Directtorque Control Technology Study for Permanent Magnet Synchronous Motor

Improved Direct Torque Control strategy for Wide Range Speed Control of Induction Motor Drives

Analysis of direct torque control in permanent magnet synchronous motor drives

An enhanced direct torque control strategy with composite controller for permanent magnet synchronous motor

A new flux and multilevel hysteresis torque band DTC with lookup table‐based switched reluctance motor drive to suppress torque ripple

Novel deadbeat direct torque and flux control for interior permanent magnet synchronous motor