Abstract:A liquid‐medium annealing strategy is demonstrated to regulate the crystallization of Sb2Se3 thin films. The resultant Sb2Se3 thin films show high‐quality crystallinity, large grain size, benign [hk1]‐orientation, and low‐density defects. As a result, the film delivers a solar cell efficiency of 9.28%, which is one of the highest efficiencies among Sb2Se3 solar cells fabricated by the thermal evaporation method. Suppression of charge recombination caused by unfavorable grain boundaries (GBs) in polycrystalline thin films is essential for improving the optoelectronic performance of semiconductor devices. For emerging antimony selenide (Sb2Se3) materials, the unique quasi‐1D structure intensifies the dependence of GB properties on the grain size and orientation, which also increases the impact of defects related to grain structure on device performance. However, these characteristics pose significant challenges in the preparation of thin films. In this study, a novel annealing approach using ammonia–thiourea is developed mixed solution as the liquid medium (LM) to finely regulate the crystallization of Sb2Se3 films, resulting in micron‐sized large grains with enhanced [hk1] orientation and fewer defects. Mechanistic studies indicate that the intermediate phase formed at the GBs promotes the growth of large grains. Moreover, LM creates a closed and uniform environment for thin‐film annealing, suppressing the volatilization of Se and reducing the types of deep‐level defects. Consequently, the film delivers a device efficiency of 9.28%, the highest efficiency achieved for Sb2Se3 solar cells fabricated via thermal evaporation. Hence, this study provides a facile and effective annealing method for controlling the crystallization of low‐dimensional materials and offers valuable guidance for the development of chalcogenide materials.

Controllable vapor transport deposition of efficient Sb2(S,Se)3 solar cells via adjusting evaporation source area

Fabricating over 7%-efficient Sb2(S,Se)3 thin-film solar cells by vapor transport deposition using Sb2Se3 and Sb2S3 mixed powders as the evaporation source

Vapor Transport Deposition of Sb 2 (S,Se) 3 Solar Cells with Continuously Tunable Band Gaps

Regulating Deposition Kinetics via A Novel Additive-assisted Chemical Bath Deposition Technology Enables 10.57%-efficient Sb2Se3 Solar Cells

Solvent‐Assisted Hydrothermal Deposition Approach for Highly‐Efficient Sb2(S,Se)3 Thin‐Film Solar Cells

Oxygen Content Modulation Toward Highly Efficient Sb2Se3 Solar Cells

Thermal diffused post-selenization for enhancing the photovoltaic performance of thermally evaporated Sb 2 Se 3 solar cell

Grain‐Boundary Elimination via Liquid Medium Annealing toward High‐Efficiency Sb2Se3 Solar Cells

Improving the performance of Sb2S3 thin-film solar cells by optimization of VTD source-substrate proximity

Self‐Regulated Growth of Large‐Grain Sb2S3 Thin Films for High‐Efficiency Solar Cells

Se-Elemental Concentration Gradient Regulation for Efficient Sb2(S,Se)3 Solar Cells With High Open-Circuit Voltages

Regulating Deposition Pressures During Rapid Thermal Evaporation Processes to Enable Efficient Sb2Se3 Solar Cells

Heterogeneous Nucleation Regulation Amends Unfavorable Crystallization Orientation and Defect Features of Antimony Selenosulfide Film for High‐Efficient Planar Solar Cells

Selenium‐Rich Sb2(S,Se)3 Thin Films Deposited via Sequential Chemical Bath Deposition for High‐Efficiency Solar Cells

Seed Layer Optimisation for Ultra-Thin Sb2Se3 Solar Cells on TiO2 by Vapour Transport Deposition

All‐Vacuum‐Processed Sb2(S,Se)3 Thin Film Photovoltaic Devices via Controllable Tuning Seed Orientation (Adv. Funct. Mater. 22/2023)

Optimizing Crystal Orientation and Defect Mitigation in Antimony Selenide Thin-Film Solar Cells through Buffer Layer Energy Band Adjustment

Efficient planar antimony sulfide thin film photovoltaics with large grain and preferential growth

Pulsed laser deposition of antimony selenosulfide thin film for efficient solar cells

Optimisation of Sb2S3 thin-film solar cells via Sb2Se3 post-treatment

Enhanced Performance of Close-Spaced Sublimation Processed Antimony Sulfide Solar Cells via Seed-Mediated Growth