Abstract:Micro relative sliding exists on the contact surface of the main primary equipment's surface structures, resulting in serious fretting fatigue. The plastic effect causes serious fatigue to the structure under alternating loads. Existing fatigue life prediction models fail to fully consider the shortcomings of fretting and plastic effects, which causes the prediction results to be significantly different to real-lifeworld in engineering situations. Therefore, it is urgent to establish a fretting damage fatigue life prediction model of contact structures which considers plastic effects. In this study, a plastic fretting fatigue life prediction model was established according to the standard structural contact theory. The location of dangerous points was evaluated according to a finite element simulation. The cyclic load maximum stress value was compared with the fretting fatigue test data to confirm the error value, and the error between the proposed fretting fatigue life model and the test value was within 15%. Concurrently, we combined this with mass data analysis and research, as it is known that the contact zone parameters have an impact on fretting fatigue and affect the structural lifespan. With the help of ABAQUS, the fretting numerical calculation of the dovetail tenon model was carried out to analyze the sensitive factors affecting the fretting fatigue life of the dovetail tenon structure. By keeping the fretting load unchanged, the contact area parameters such as contact surface form, contact area width and friction coefficient were changed in order to calculate the fretting stress value, σfretting and the dovetail structure was improved to extend its fretting fatigue life. Finally, it was concluded that fretting fatigue was most sensitive to the width and contact form of the contact area. In actual engineering design, multiple factors should be considered comprehensively to determine a more accurate and suitable width and form of the contact area. For the selection of friction coefficient, on the premise of saving costs and meeting the structural strength requirements, the friction coefficient should be as small as possible, and the problem can also be solved through lubrication during processing.

Finite Element Simulation and Fretting Wear Prediction of a Tenon Connection Structure

Numerical Study on Fretting Wear of DZ125/FGH99 Tenon/Mortise Joint Structure

Modeling and simulation of wear for alignment mechanism of large aircraft component

Fatigue Crack Propagation Analysis in an Aero-Engine Turbine Disc Using Computational Methods and Spin Test

An adaptive finite element method for coupled fretting wear and fatigue crack propagation simulation

Research on the effect of fretting wear on the vibration characteristics of the tenon joint bladed disk

Mechanism and Prediction Method of Fretting Damage in Involute Spline Couplings of Aero-engine

Fretting Fatigue Life Prediction of Dovetail Structure Based on Plastic Effect and Sensitivity Analysis of Influencing Factors

A computationally efficient method for the prediction of fretting wear in practical engineering applications

Experimental study of fretting fatigue in dovetail assembly considering temperature effect based on damage mechanics method

Fretting Wear-Fatigue Life Prediction for Aero-Engine’s Involute Spline Couplings Based on Abaqus

Experimental investigation and prediction method of fretting wear in rack-plane spline couplings

Contact stress prediction and fretting wear measurement of aeronautic crowned involute splines

Finite element analysis of fretting wear considering variable coefficient of friction

Turbine blade arc tenon/mortise structure and optimization method based on parameterized mesh deformation

Experimental and computational investigation of fretting fatigue characterized by nominal contact pressure in dovetail structures

Finite element analysis of dovetail joint fretting wear considering glaze layer at high temperature

Modification methodology of fretting wear in involute spline

A Debris Layer Evolution-Based Model for Predicting Both Fretting Wear and Fretting Fatigue Lifetime

Prediction and Experimental Validation of Aviation Floating Involute Spline

Dynamic changes of mechanical properties induced by friction in the Archard wear model