Abstract:Micro relative sliding exists on the contact surface of the main primary equipment's surface structures, resulting in serious fretting fatigue. The plastic effect causes serious fatigue to the structure under alternating loads. Existing fatigue life prediction models fail to fully consider the shortcomings of fretting and plastic effects, which causes the prediction results to be significantly different to real-lifeworld in engineering situations. Therefore, it is urgent to establish a fretting damage fatigue life prediction model of contact structures which considers plastic effects. In this study, a plastic fretting fatigue life prediction model was established according to the standard structural contact theory. The location of dangerous points was evaluated according to a finite element simulation. The cyclic load maximum stress value was compared with the fretting fatigue test data to confirm the error value, and the error between the proposed fretting fatigue life model and the test value was within 15%. Concurrently, we combined this with mass data analysis and research, as it is known that the contact zone parameters have an impact on fretting fatigue and affect the structural lifespan. With the help of ABAQUS, the fretting numerical calculation of the dovetail tenon model was carried out to analyze the sensitive factors affecting the fretting fatigue life of the dovetail tenon structure. By keeping the fretting load unchanged, the contact area parameters such as contact surface form, contact area width and friction coefficient were changed in order to calculate the fretting stress value, σfretting and the dovetail structure was improved to extend its fretting fatigue life. Finally, it was concluded that fretting fatigue was most sensitive to the width and contact form of the contact area. In actual engineering design, multiple factors should be considered comprehensively to determine a more accurate and suitable width and form of the contact area. For the selection of friction coefficient, on the premise of saving costs and meeting the structural strength requirements, the friction coefficient should be as small as possible, and the problem can also be solved through lubrication during processing.

Finite element analysis of dovetail joint fretting wear considering glaze layer at high temperature

Numerical Study on Fretting Wear of DZ125/FGH99 Tenon/Mortise Joint Structure

Finite Element Simulation Of High-Speed Cutting Alloy Cast Iron

Experimental study of fretting fatigue in dovetail assembly considering temperature effect based on damage mechanics method

An investigation of high and room temperature fretting fatigue of DD6-FGH96 dovetail joint in aero-engine: Experimental and numerical analysis

Understanding and formalization of the fretting-wear behavior of a cobalt-based alloy at high temperature

Research on the effect of fretting wear on the vibration characteristics of the tenon joint bladed disk

Experimental and computational investigation of fretting fatigue characterized by nominal contact pressure in dovetail structures

Finite element analysis of fretting wear considering variable coefficient of friction

Ti-6Al-4V fretting wear and a quantitative indicator for fretting regime evaluation

Comparative Investigation on the Fretting and Sliding Wear Properties of TC4 Against GCr15 under Different Temperatures

A Debris Layer Evolution-Based Model for Predicting Both Fretting Wear and Fretting Fatigue Lifetime

Fretting Fatigue Life Prediction of Dovetail Structure Based on Plastic Effect and Sensitivity Analysis of Influencing Factors

Finite Element Simulation of Fretting Wear Behaviors under the Ball-on-flat Contact Configuration

Fretting fatigue crack initiation and propagation behaviours of Ti6Al4V alloy coated by functionally graded material

Improvement in fretting fatigue life of GH4169 dovetail joint component by bonded solid lubricant coating at 500 °C

Fretting Fatigue Analysis of Additively Manufactured Blade Root Made of Intermetallic Ti-48Al-2Cr-2Nb Alloy at High Temperature

Experimental and finite element analysis for evaluating influence of contact pressure on fretting fatigue mechanisms of A319‐T6 cast aluminum alloy

Parametric Modeling and Simulation of the Gear Shaping Process of Floating Support Friction Disk

FEM computation of groove ridge and Monte Carlo simulation in two-body abrasive wear

A modified critical distance method for estimating fretting fatigue life of dovetail joints