Abstract:Micro relative sliding exists on the contact surface of the main primary equipment's surface structures, resulting in serious fretting fatigue. The plastic effect causes serious fatigue to the structure under alternating loads. Existing fatigue life prediction models fail to fully consider the shortcomings of fretting and plastic effects, which causes the prediction results to be significantly different to real-lifeworld in engineering situations. Therefore, it is urgent to establish a fretting damage fatigue life prediction model of contact structures which considers plastic effects. In this study, a plastic fretting fatigue life prediction model was established according to the standard structural contact theory. The location of dangerous points was evaluated according to a finite element simulation. The cyclic load maximum stress value was compared with the fretting fatigue test data to confirm the error value, and the error between the proposed fretting fatigue life model and the test value was within 15%. Concurrently, we combined this with mass data analysis and research, as it is known that the contact zone parameters have an impact on fretting fatigue and affect the structural lifespan. With the help of ABAQUS, the fretting numerical calculation of the dovetail tenon model was carried out to analyze the sensitive factors affecting the fretting fatigue life of the dovetail tenon structure. By keeping the fretting load unchanged, the contact area parameters such as contact surface form, contact area width and friction coefficient were changed in order to calculate the fretting stress value, σfretting and the dovetail structure was improved to extend its fretting fatigue life. Finally, it was concluded that fretting fatigue was most sensitive to the width and contact form of the contact area. In actual engineering design, multiple factors should be considered comprehensively to determine a more accurate and suitable width and form of the contact area. For the selection of friction coefficient, on the premise of saving costs and meeting the structural strength requirements, the friction coefficient should be as small as possible, and the problem can also be solved through lubrication during processing.

Experimental and computational investigation of fretting fatigue characterized by nominal contact pressure in dovetail structures

Nonlocal fretting fatigue assessment for dovetail joints

Experimental Study and Fretting Fatigue Life Prediction in Dovetail Assembly Considering Stress–temperature Nonlinear Coupling Effect

Fretting Fatigue Life Prediction of Dovetail Structure Based on Plastic Effect and Sensitivity Analysis of Influencing Factors

Experimental and Numerical Investigation on Fretting Fatigue Behavior of Nickel-based Single Crystal Superalloy at High Temperature

Experimental study of fretting fatigue in dovetail assembly considering temperature effect based on damage mechanics method

An investigation of high and room temperature fretting fatigue of DD6-FGH96 dovetail joint in aero-engine: Experimental and numerical analysis

Fretting Fatigue Failure Behavior of Nickel-based Single Crystal Superalloy Dovetail Specimen in Contact with Powder Metallurgy Pads at High Temperature

Research on Factors Affecting Fretting Fatigue Life of High‐temperature Dovetail Tenon

Analysis of Failure Behaviors of Dovetail Assemblies Due to High Gradient Stress under Contact Loading

ANALYSIS OF THE STRESS DISTRIBUTION AND FATIGUE LIFE OF ASYMMETRICAL DOG-BONE MECHANICAL JOINT

An Investigation on Fretting Fatigue Mechanism under Complex Cyclic Loading Conditions

A modified critical distance method for estimating fretting fatigue life of dovetail joints

Predicting the Fretting Fatigue Strength and Life of Titanium Alloys

Investigation and Numerical Simulation on Fretting Fatigue of NiTi

Multiaxial Fatigue Analysis of Notched Components Using Combined Critical Plane and Critical Distance Approach

Nonlocal Multiaxial Fatigue Model Based on Artificial Neural Networks for Predicting Fretting Fatigue Life of Dovetail Joints

Research of Fretting Fatigue Characteristics of a Fiber Metal Laminate – A Steel Single-Lap Joint

Experimental and Numerical Investigations of Fretting Fatigue Behavior for Steel Q235 Single-Lap Bolted Joints

Experimental and finite element analysis for evaluating influence of contact pressure on fretting fatigue mechanisms of A319‐T6 cast aluminum alloy

Numerical Study on Fretting Wear of DZ125/FGH99 Tenon/Mortise Joint Structure