Abstract:Micro relative sliding exists on the contact surface of the main primary equipment's surface structures, resulting in serious fretting fatigue. The plastic effect causes serious fatigue to the structure under alternating loads. Existing fatigue life prediction models fail to fully consider the shortcomings of fretting and plastic effects, which causes the prediction results to be significantly different to real-lifeworld in engineering situations. Therefore, it is urgent to establish a fretting damage fatigue life prediction model of contact structures which considers plastic effects. In this study, a plastic fretting fatigue life prediction model was established according to the standard structural contact theory. The location of dangerous points was evaluated according to a finite element simulation. The cyclic load maximum stress value was compared with the fretting fatigue test data to confirm the error value, and the error between the proposed fretting fatigue life model and the test value was within 15%. Concurrently, we combined this with mass data analysis and research, as it is known that the contact zone parameters have an impact on fretting fatigue and affect the structural lifespan. With the help of ABAQUS, the fretting numerical calculation of the dovetail tenon model was carried out to analyze the sensitive factors affecting the fretting fatigue life of the dovetail tenon structure. By keeping the fretting load unchanged, the contact area parameters such as contact surface form, contact area width and friction coefficient were changed in order to calculate the fretting stress value, σfretting and the dovetail structure was improved to extend its fretting fatigue life. Finally, it was concluded that fretting fatigue was most sensitive to the width and contact form of the contact area. In actual engineering design, multiple factors should be considered comprehensively to determine a more accurate and suitable width and form of the contact area. For the selection of friction coefficient, on the premise of saving costs and meeting the structural strength requirements, the friction coefficient should be as small as possible, and the problem can also be solved through lubrication during processing.

Nonlocal fretting fatigue assessment for dovetail joints

Experimental and computational investigation of fretting fatigue characterized by nominal contact pressure in dovetail structures

Fretting Fatigue Life Prediction of Dovetail Structure Based on Plastic Effect and Sensitivity Analysis of Influencing Factors

A modified critical distance method for estimating fretting fatigue life of dovetail joints

Experimental study of fretting fatigue in dovetail assembly considering temperature effect based on damage mechanics method

An investigation of high and room temperature fretting fatigue of DD6-FGH96 dovetail joint in aero-engine: Experimental and numerical analysis

Development of a non-local approach for life prediction of notched specimen considering stress/strain gradient and elastic-plastic fatigue damage

Research of Fretting Fatigue Characteristics of a Fiber Metal Laminate – A Steel Single-Lap Joint

Fracture Mechanics Assessment of Stress Concentrations in Incomplete Fretting Contacts

Accumulated crystal plasticity dissipation energy driven continuum damage two-scale model for fretting fatigue initiation life

A comparative study of several life prediction models based on the critical plane approach for fretting fatigue crack initiation

Fretting Fatigue Life Model Under Combined Loading

Fatigue and damage evolution in wood T-shaped mortise and tenon joints

Probabilistic framework for fatigue life assessment of notched components under size effects

An enhanced stress field intensity approach for fatigue life assessment combining notch and size effect

A Debris Layer Evolution-Based Model for Predicting Both Fretting Wear and Fretting Fatigue Lifetime

Uncertainty Quantification of Fatigue Life Prediction in Welded Structures Using Microstructure-Based Simulations

Physical description and model validation of welded joint fatigue damage evolution

Experimental and numerical study on the fretting wear-fatigue interaction evolution in press-fitted axles

Cyclic elastoplasticity-based life assessment of fatigue crack initiation and subsequent propagation in rib-to-deck welded joints

Fatigue Life Prediction of Notched Details Using SWT Model and LEFM-Based Approach