Abstract:The phenomenon of fretting fatigue damage is related to tribological behaviour and commonly occurs at the contact interface between two bodies that sustain oscillation loads. Based on the complicated mechanical situation, several methods have been developed to predict the crack initiation location and life. The Continuum Damage Mechanics (CDM) approach in conjunction with Finite Element Method (FEM) is used in this paper. The fretting fatigue lifetime includes two parts, crack initiation lifetime and crack propagation lifetime, and this paper focuses on the phase of crack initiation. Homogeneous materials are usually studied in fretting fatigue problems, and the influence of defects is necessary to be considered. In this study, the authors proposed several models to consider the effect of heterogeneity on crack initiation point and crack initiation lifetime and the numerical model is a 2D one with plane strain assumption. To get more accurate numerical results with low computational cost, a Two-Scale Analysis approach is developed in this paper. Two macroscopic models and three microscopic models are proposed, including a Macroscopic homogeneous model (Macro-HOMO), a Multiscale Homogenization model with Direct Numerical Simulation (MH-DNS), a Microscopic homogeneous model (Micro-HOMO), a Microscopic Model with equivalent material properties by using Mean Field Homogenization method (Micro-MFH), and a microscopic model with Direct Numerical Simulation (Micro-DNS). The results obtained by using the CDM approach with different microscopic models are compared, which shows that the prediction accuracy of the Micro-DNS is the best. In addition, in terms of computational cost, the Micro-DNS model shows great advantages as well comparing to the Macro-DNS model.

A Debris Layer Evolution-Based Model for Predicting Both Fretting Wear and Fretting Fatigue Lifetime

A Model for Ultra Low Cycle Fatigue Damage Prediction of Structural Steel

A damage mechanics approach to fretting fatigue life prediction with consideration of elastic–plastic damage model and wear

Fretting Wear Modelling Incorporating Cyclic Ratcheting Deformations and the Debris Evolution for Ti-6Al-4V

New Approach Based on Continuum Damage Mechanics with Simple Parameter Identification to Fretting Fatigue Life Prediction

Continuum Damage Mechanics Based Fatigue Life Prediction and Fatigue Property Analysis of Pitting Corrosion Steel Bars

A New Approach to Fatigue Damage Modeling of Composite Laminates

A New Pair of Cumulative Fatigue Damage Models for Composite Materials

Accumulated crystal plasticity dissipation energy driven continuum damage two-scale model for fretting fatigue initiation life

Numerical Investigation to the Effect of Wear on Fretting Fatigue Life Using CDM and Fracture Mechanics

A Continuum Damage Mechanics Approach for Fatigue Life Prediction of Open-Hole Metallic Plate

Predicting the Fretting Fatigue Strength and Life of Titanium Alloys

Structural mechanics model for anisotropic damage and fatigue life prediction method of face-centered cubic metal materials

A Life Prediction Model for Low Cycle Fatigue Based on Continuum Damage Mechanics

A Continuum Damage Mechanics Approach Coupled with an Improved Pit Evolution Model for the Corrosion Fatigue of Aluminum Alloy

A Continuous Low Cycle Fatigue Damage Model and Its Application in Engineering Materials

The role of plastic anisotropy deformation in fretting wear predictions

Two-Scale Analysis of Fretting Fatigue crack initiation in heterogeneous materials using Continuum Damage Mechanics Approach

The Fatigue Life Prediction for Structure with Surface Scratch Considering Cutting Residual Stress, Initial Plasticity Damage and Fatigue Damage

Modeling adhesive and abrasive wear phenomena in fretting interfaces: A multiphysics approach coupling friction energy, third body and contact oxygenation concepts

Bi-variable Damage Model for Fatigue Life Prediction of Metal Components