Abstract:There are many sand-laden waters in China, and the wear of hydraulic structures caused by sand-laden water diversion has been paid more and more attention. Taking the spillway of a reservoir as the research object, the numerical model of erosion wear caused by sediment-laden particle flows on the spillway was established by using the computational fluid dynamics (CFD) method, VOF (Volume of Fluid) multiphase flow model and DPM (Discrete Phase Model). Through the simulation analysis of the spillway’s overall erosion, the distribution of the spillway erosion wear was obtained. Then, according to the main wear parts, the single variable, such as sediment diameter, sediment concentration, flow velocity and gate opening degree, was changed to study the erosion amount of the spillway and the distribution law of the spillway erosion parts. The results show that the main erosion sites of the spillway are at the bottom of the gate chamber and the middle section of the spillway. The maximum erosion increases linearly with the increase in sediment concentration. With the increase in sediment concentration, the sediment concentration changed from 1 kg/m3 to 6 kg/m3, and the maximum erosion of the spillway increased from 2.58 × 10−7 kg/m2 to 1.53 × 10−6 kg/m2. The erosion at the bottom of the spillway and gate leaf increases first and then decreases with the increase in sediment diameter and reaches the maximum value when the particle size is 0.002 mm. The erosion at the bottom of the spillway and the gate leaf increases with different growth trends as the flow velocity increases, when the flow velocity increases from 2 m/s to 9 m/s and the maximum erosion amount at the bottom of the spillway increases from 3.66 × 10−7 kg/m2 to 1.14 × 10−6 kg/m2, and the maximum erosion of the gate leaf increased from 1.66 × 10−8 kg/m2 to 8.98 × 10−6 kg/m2. The erosion amount at the bottom of the spillway increases with the increase in the gate opening between 0 and 3 m and tends to be stable when the gate opening is greater than 3 m. The maximum erosion position moves to the rear part of the spillway with the change in the gate opening. The change in the gate opening has no obvious effect on the erosion amount of the gate leaf but only changes the area of the gate erosion part. Thus, the erosion wear distribution of spillway under different work conditions is summarized, and the qualitative study between the erosion wear and the distribution of sediment diameter, sediment concentration, flow velocity and gate opening degree is made.

Research on the Erosion Resistance of High-Pressure Liquid–Solid Two-Phase Flow Junction Drilling Spool

Visualization and Influence Factors of Erosion at the Working Edge of a Hydraulic Servo Spool Valve

Numerical Simulation Study of Hydraulic Fracturing Nozzle Erosion in Deep Well

An Optimized E/CRC Erosion Model of Round Particles for Hydraulic Spool Valves With Euler–Lagrange Two-Phase Simulation

Experimental and Numerical Study on the Impact of Sand-Carrying Liquid Erosion on Coiled Tubing Wall

Numerical Simulation on the Erosion Characteristics of Dense Particles in the Annular Channel of Downhole Fracture Pipe

Erosion Resistance of Casing with Resin and Metallic Coatings in Liquid–Solid Two-Phase Flow

Numerical Simulation on Erosion and Stress on a Small-Diameter Hydrajet Fracturing Tool

Experimental Study on Erosion of P110 Steel in Liquid-solid Two-phase Flow

EROSION WEAR AND PERFORMANCE SIMULATION OF CENTRIFUGAL PUMP FOR SOLID-LIQUID FLOW

Experimental and Numerical Studies on Erosion Damage in Damping Holes on the Valve Plate of an Axial Piston Pump

Numerical Investigation of Erosion Wear Characteristics of Hydraulic Spillway

Erosion behavior and influence of solid particles in hydraulic spool valve without notches

Three-dimensional numerical investigation of solid particle erosion in gate valves

Comprehensive analysis of the effect of structural parameters on erosion wear, structural stress, and deformation of high-pressure double-elbow in shale-gas fracturing

Experimental and numerical study of erosion in a non-Newtonian hydraulic fracturing fluid

Numerical study on erosion behavior of sliding sleeve ball seat for hydraulic fracturing based on experimental data

Study on Erosion Wear Law and Anti-Erosion Ability Optimization of Wellhead Four-Way

CFD-DPM modelling of solid particle erosion on weld reinforcement height in liquid-solid high shear flows

Current Situation and Prospect of Erosion Wear

Study on the Erosion Law of Gas with Cuttings Against Tool Joint