Abstract:The erosion of surface pipelines induced by proppant flowback during shale gas production is significant. The surface pipelines in a shale gas field in the Sichuan Basin experienced perforation failures after only five months of service. To investigate the erosion features of L360N, coatings, and ceramics and optimize the selection of two protective materials, a gas–solid two-phase flow jet erosion experimental device was used to explore the erosion resistance of L360N, coatings, and ceramics under different impact velocities (15 m/s, 20 m/s, and 30 m/s). An energy dispersive spectroscope, a scanning electron microscope, and a laser confocal microscope were employed to analyze erosion morphologies. With the increase in flow velocity, the erosion depth and erosion rate of L360N, coating, and ceramic increased and peaked under an impact velocity of 30 m/s. The maximum erosion rate and maximum erosion depth of L360N were, respectively, 0.0350 mg/g and 37.5365 μm. Its primary material removal mechanism was the plowing of solid particles, and microcracks were distributed on the material surface under high flow velocities. The maximum erosion rate and maximum erosion depth of the coating were, respectively, 0.0217 mg/g and 18.9964 μm. The detachment of matrix caused by plowing is the main material removal mechanism. The maximum erosion rate and maximum erosion depth of ceramics were, respectively, 0.0108 mg/g and 12.4856 μm. The erosion mechanisms were micro-cutting and plowing. Under different particle impact velocities, different erosion morphologies were observed, but the primary erosion mechanism was the same. The erosion resistance of the ceramics was higher than that of the coatings. Therefore, ceramic lining materials could be used to protect the easily eroded parts, such as pipeline bends and tees, and reduce the failure rate by more than 93%. The study provided the data and theoretical basis for the theoretical study on oil and gas pipeline erosion and pipeline material selection.

CFD-DPM modelling of solid particle erosion on weld reinforcement height in liquid-solid high shear flows

Coarse-grained CFD-DEM Simulation of Elbow Erosion Induced by Dilute Gas-Solid Flow: A Multi-Level Study

Numerical simulation research for the effect of particle shape on the erosion wear in elbow

Simulation of Abrasion Characteristics of Polar Ship Seawater Pipelines under the Coupling of Ice Particles and Vibration

Three-dimensional numerical investigation of solid particle erosion in gate valves

Numerical study of solid particle erosion on sidewall

Numerical Simulation of Elbow Erosion in Shale Gas Fields under Gas-Solid Two-Phase Flow

Investigation on the Erosion Characteristics of Liquid–Solid Two-Phase Flow in Tee Pipes Based on CFD-DEM

Numerical Study of Solid Particle Erosion in a Cavity with Different Wall Heights

Prediction of sand particle trajectories and erosion distribution in offshore oil and gas pipelines

CFD-Based Erosion and Corrosion Modeling of a Pipeline with CO2-Containing Gas–Water Two-Phase Flow

A New Method for Predicting Erosion Damage of Suddenly Contracted Pipe Impacted by Particle Cluster via CFD-DEM

Experimental Study on Particle Erosion Failure of Abrupt Pipe Contraction in Hydraulic Fracturing

Modeling of Particle Migration in Piping Based on an Improved Discrete Element Method

An algorithm combining sedimentation experiments for pipe erosion investigation

Research on the solid particle erosion wear of pipe steel for hydraulic fracturing based on experiments and numerical simulations

Multi-Scale Simulation of Fluid-Structure Interaction Induced Erosion on the Pipe Surface

CFD-DEM analysis of hydraulic conveying of non-spherical particles through a vertical-bend-horizontal pipeline

Research on the Erosion Law and Protective Measures of L360N Steel for Surface Pipelines Used in Shale Gas Extraction

Effects of axial misalignment welding defects on the erosive wear of natural gas piping

Simulation of Elbow Erosion of Gas–Liquid–Solid Three-Phase Shale Gas Gathering Pipeline Based on CFD-DEM