Abstract:Front contacts on CIGS modules enhance the module performance. The performance index IV‐R is introduced to quantify the compromise between the thermal damages of CIGS modules and the lateral electrode resistance. The application of ultralow‐temperature pastes seems to be promising for front contacts on CIGS modules leading to low thermal module damages. The performance index ranges from 93.67% ≥ IV‐R|paste‐B ≥ 65.05%. However, low‐temperature pastes achieve low lateral electrode resistances. Its performance index varies between 85.54% ≥ IV‐R|paste‐A ≥ 44.70% due to thermal damages. The Cu (ln1‐xGax)Se2 (CIGS) solar cell technology is a potentially high‐efficient approach with unique properties compared with silicon photovoltaic, like flexible lightweight substrates and different colored designs. So far, the full potential of the transparent conductive oxide layers has not been exploited yet as no front contacts are applied, resulting in significant losses from the cell‐to‐module level. In this study, Ag front contacts are applied by parallel dispensing onto indium tin oxide layers of silicon heterojunction substrates and CIGS substrates. Subsequently, a thermally curing process is carried out to form the conductive contacts. The curing conditions are varied between 200°C ≥ Tc ≥ 100°C combined with 20 min ≥ tc ≥ 1.5 min. The study aims to determine the curing parameters enabling low‐resistivity contacts by using low‐temperature curing Ag paste and ultralow‐temperature curing Ag paste. The lateral electrode resistance and the contact resistivity of printed electrodes are measured. The results of simultaneous thermogravimetry‐differential scanning calorimetry (pastes) and microstructure analysis of printed electrodes are used to explain the electrical parameters of the printed electrodes. In general, higher curing temperatures and longer curing durations encourage the sintering and densification process of the applied electrodes resulting in low‐resistivity contacts. Contact resistivities below ρc,TLM

Curing conditions for low‐resistivity contacts on transparent conductive oxide layers for different solar cell applications

Curing conditions for low‐resistivity contacts on transparent conductive oxide layers for different solar cell applications

Effectively transparent electrical contacts for thermally sensitive solar cells

Improved Electrical Performance of Low-Temperature-Cured Silver Electrode for Silicon Heterojunction Solar Cells

Copper-Plating Metallization With Alternative Seed Layers for c-Si Solar Cells Embedding Carrier-Selective Passivating Contacts

A silicon carbide-based highly transparent passivating contact for crystalline silicon solar cells approaching efficiencies of 24%

TCO contacts on poly-Si layers: High and low temperature approaches to maintain passivation and contact properties

Laser Ablation and Ni/Cu Plating Approach for Tunnel Oxide Passivated Contacts Solar Cells with Variate Polysilicon Layer Thickness: Gains and Possibilities in Comparison to Screen Printing

Dispensing of low-temperature silver pastes

Study on the Sintering and Contact Formation Process of Silver Front Side Metallization Pastes for Crystalline Silicon Solar Cells

Significant Passivation Effect of Cu(In, Ga)Se 2 Solar Cells via Back Contact Surface Modification Using Oxygen Plasma

Fast screen printing and curing process for silicon heterojunction solar cells

Novel cost-effective approach to produce nano-sized contact openings in an aluminum oxide passivation layer up to 30 nm thick for CIGS solar cells

Passivation of Interfaces in Thin Film Solar Cells: Understanding the Effects of a Nanostructured Rear Point Contact Layer

Insight into the Contact Mechanism of Ag/Al–Si Interface for the Front‐Side Metallization of TOPCon Silicon Solar Cells

Novel interlayer boosting the performance of evaporated Cu2O hole‐selective contacts in Si solar cells

Is a Passivated Back Contact Always Beneficial for Cu (in,ga)se2 Solar Cells?

Interplay of annealing temperature and doping in hole selective rear contacts based on silicon-rich silicon-carbide thin films

Modeling the potential of screen printed front junction CZ silicon solar cell with tunnel oxide passivated back contact

Low-temperature sintering properties of the screen-printed silver paste for a-Si:H/c-Si heterojunction solar cells