Abstract:Optical fiber sensors based on waveguide technology are promising and attractive in chemical, biotechnological, agronomy, and civil engineering applications. A microfluidic system equipped with a long-period fiber grating (LPFG) capable of measuring chloride ion concentrations of several sample materials is presented. The LPFG-based microfluidic platform was shown to be effective in sensing very small quantities of samples and its transmitted light signal could easily be used as a measurand. The investigated sample materials included reverse osmosis (RO) water, tap water, dilute aqueous sample of sea sand soaked in RO water, aqueous sample of sea sand soaked in RO water, dilute seawater, and seawater. By employing additionally a chloride ion-selective electrode sensor for the calibration of chloride-ion concentration, a useful correlation (R2 = 0.975) was found between the separately-measured chloride concentration and the light intensity transmitted through the LPFG at a wavelength of 1,550 nm. Experimental results show that the sensitivity of the LPFG sensor by light intensity interrogation was determined to be 5.0 × 10(-6) mW/mg/L for chloride ion concentrations below 2,400 mg/L. The results obtained from the analysis of data variations in time-series measurements for all sample materials show that standard deviations of output power were relatively small and found in the range of 7.413 × 10(-5)-2.769 × 10(-3) mW. In addition, a fairly small coefficients of variations were also obtained, which were in the range of 0.03%-1.29% and decreased with the decrease of chloride ion concentrations of sample materials. Moreover, the analysis of stability performance of the LPFG sensor indicated that the random walk coefficient decreased with the increase of the chloride ion concentration, illustrating that measurement stability using the microfluidic platform was capable of measuring transmitted optical power with accuracy in the range of -0.8569 mW/ [Formula: see text] to -0.5169 mW/ [Formula: see text]. Furthermore, the bias stability was determined to be in the range of less than 6.134 × 10(-8) mW/h with 600 s time cluster to less than 1.412 × 10(-6) mW/h with 600 s time cluster. Thus, the proposed LPFG-based microfluidic platform has the potential for civil, chemical, biological, and biochemical sensing with aqueous solutions. The compact (3.5 × 4.2 cm), low-cost, real-time, small-volume (∼70 μL), low-noise, and high-sensitive chloride ion sensing system reported here could hopefully benefit the development and applications in the field of chemical, biotechnical, soil and geotechnical, and civil engineering.

A Simple Fabrication Method of Chloride Sensor Based on Hot-Dipped Ag/AgCl@PVC for Water Quality Monitoring

Integrated Water Quality Monitoring System with Ph, Free Chlorine, and Temperature Sensors

Real-Time Water Quality Monitoring with Chemical Sensors

A Novel Chemical Sensor with Multiple All-Solid-state Electrodes and Its Application in Freshwater Environmental Monitoring.

Polystyrene-coated Interdigitated Microelectrode Array to Detect Free Chlorine Towards Lot Applications

Electrochemical detection of chloride at the multilayer nano-silver modified indium-tin oxide thin electrodes

Embeddable Chloride Sensor for Monitoring Chloride Penetration into Cement Mortar

Soft, flexible conductivity sensors for ocean salinity monitoring

Development of a Highly Selective Chloride Ion Potentiometric Sensor Utilizing a Novel N, N-Ethylene-bis-(Salicylideneaminato) Zinc (II) Molecule for Clean Environment

An Ultrasensitive Competitive Chemiluminescence Immunosensor Coupled Flow Injection Cell Modified by Oxidized Graphene-Chitosan for the Detection of Hg2+

A fully screen-printed potentiometric chloride ion sensor employing a hydrogel-based touchpad for simple and non-invasive daily electrolyte analysis

Fully Integrated, Simple, and Low-Cost Electrochemical Sensor Array for in Situ Water Quality Monitoring

Ion-Selective Detection of Cations and Anions by Using Pulsed Amperometric Two-Electrode System

Polyvinyl Chloride-Coated Interdigitated Microelectrode Array to Detect Water Quality Towards IoT Applications

Hybrid cement composite-based sensor for in-situ chloride monitoring in concrete structures

A microfluidic long-period fiber grating sensor platform for chloride ion concentration measurement

Chloric Disinfection of Water Treatment Process Automatic Monitoring Alarm System

High-sensitivity and energy-efficient chloride ion sensors based on flexible printed carbon nanotube thin-film transistors for wearable electronics

A Novel and Cost-Effective 1-Octadecanethiol SAMs-on-Au Based QCM Sensor for Detecting ClO2 Residues in Bleaching Wastewater

Review of Chloride Ion Detection Technology in Water

An efficient amperometric sensor for chloride ion detection through electroactive e-spun PVA-PANi-g-C3N4 nanofiber