Abstract:A novel method for sensitive determination of chloride anion at multilayer nano-silver modified indiumtin oxide (ITO) electrode has been developed. The multilayer films were fabricated via self-assembly/electrochemical-assembly methods, in which the 3-aminopropyltriethoxysilane (APTS) was used to modify ITO conducting glass, layer-by-layer (LBL) method was applied to prepare the multilayer films and poly (diallyldimethylammonium chloride) (PDDA) was employed as a bridging ligand. The resulting electrode (Ag/{PDDA/Ag}(m)/APTS/ITO) surface was characterized with SEM and UV-vis. The electrochemical behavior of Cl- at the Ag/{PDDA/Ag}(m)/APTS/ITO electrode was studied by cyclic voltammetry. The results indicated that the modified electrode exhibited substantial enhancement in electrochemical sensitivity for Cl- due to its large surface area and particular absorbability. The Ag/{PDDA/Ag}(m)/APTS/ITO electrode detected Cl- by voltammetry based on the oxidation of Ag/Cl- that generated from a specific reaction of chloride ions with nano-silver. After accumulation of 3 min for Cl- at Ag/{PDDA/Ag}(m)/APTS/ITO electrode, the peak height (Ag/Cl-) increased linearly with the concentrations of Cl- in the range of 1.0 x 10(-8)-1.0 x 10(-6) mol L-1. The detection limit was 5.2 x 10(-9) mol L-1 at 3 sigma level. This modified electrode could be successfully applied in water samples with low cost and high sensitivity. (C) 2011 Elsevier B.V. All rights reserved.

Electrochemical detection of chloride at the multilayer nano-silver modified indium-tin oxide thin electrodes