Abstract:Structural health monitoring (SHM) using self‐sensing cement‐based materials has been reported before, where nano‐fillers have been incorporated in cementitious matrices as functional sensing elements. A percolation threshold is always required in order for conductive nano‐fillers modified concrete to be useful for SHM. Nonetheless, the best pressure/strain sensitivity results achieved for any self‐sensing cementitious matrix are <0.01 MPa−1. In this work, we introduce for the first‐time novel partially reduced graphene oxide based electronic textile (e‐textile) embedded in plain and as well as in polymer‐binder‐modified cementitious matrix for SHM applications. These e‐textile embedded cementitious composites are independent of any percolation threshold due to the interconnected fabric inside the host matrix. The piezo‐resistive response was measured by applying direct and cyclic compressive loads (ranging from 0.10 to 3.90 MPa). A pressure sensitivity of 1.50 MPa−1 and an ultra‐high gauge factor of 2000 was obtained for the system of the self‐sensing cementitious structure with embedded e‐textiles. The sensitivity of this new system with embedded e‐textile is an order of magnitude higher than the state‐of‐the‐art nanoparticle based self‐sensing cementitious composites. The composites showed mechanical stability and functional durability over long‐term cyclic compression tests of 1000 cycles. Additionally, a two time‐constant model was used to validate the experimental results on decay response of the e‐textile embedded composites. We introduce novel reduced graphene oxide based electronic textile (e‐textile) embedded in cementitious matrix for structural health monitoring. The piezo‐resistive response was measured by applying direct and cyclic compressive loads (0.1 to 3.9 MPa). A pressure sensitivity of 1.5 MPa‐1 and an ultra‐high gauge factor of 2000 was obtained for the system of the self‐sensing cementitious structure with embedded e‐textiles. The sensitivity of this new system with embedded e‐textile is many orders of magnitude higher than nanoparticle based self‐sensing of cementitious composites.

Hybrid cement composite-based sensor for in-situ chloride monitoring in concrete structures

Embeddable Chloride Sensor for Monitoring Chloride Penetration into Cement Mortar

Developing a Novel Expression for Chloride Ion Concentration Threshold in Reinforced Concrete: Integration of Electrochemical Analysis and Time-Dependent Modeling

Alkali-Activated Cement Sensors for Sodium Chloride Monitoring

Fluorescent Probe-Based Fiber Optic Sensor for Real-Time Monitoring of Chloride Ions in Coastal Concrete Structures

A New Corrosion Sensor To Determine The Start And Development Of Embedded Rebar Corrosion Process At Coastal Concrete

Electrical Based Sensors and Remote Monitoring System for Assessing the Corrosion Related Activity in Concrete at Hangzhou Bay Bridge

Effect of chloride penetration on electrical resistivity of CNT–CF/cement composites and its application as chloride sensor for reinforced mortar

Experimental study on electrical characteristics of ions in concrete at early age under electric field

State-Of-The-Art of Self-Sensing Cement Composite Materials and Its Sensors

Monitoring chloride ion penetration in concrete with different mineral admixtures based on embedded chloride ion selective electrodes

An electronic textile embedded smart cementitious composite

EXPERIMENTAL STUDY ON THE CHLORIDE DIFFUSION OF CONCRETE BASED ON ITS PORE STRUCTURE

Cementitious composites modified by nanocarbon fillers with cooperation effect possessing excellent self-sensing properties

A state-of-the-art review on Ag/AgCl ion-selective electrode used for non-destructive chloride detection in concrete

Influence of AgCl Film Resistance on Stability and Potential Response of Ag/AgCl Chloride-sense Electrode in Simulated Concrete Pore Solution

Investigation of Chloride Corrosion Process of Cement and Concrete-Based Materials Based on Electrochemical Impedance Spectroscopy

Threshold Chloride Levels for Localized Carbon Steel Corrosion in Simulated Concrete Pore Solutions Using Coupled Multielectrode Array Sensors

Developing a Multi-Element Sensor to Non-Destructively Monitor Several Fundamental Parameters Related to Concrete Durability

Non-Destructive Monitoring of Hydration Characteristics in Alternative Materials and Seawater-Based Cementitious Pastes Using Electrochemical Impedance Spectroscopy

Intrinsic graphene/cement-based sensors with piezoresistivity and superhydrophobicity capacities for smart concrete infrastructure